Mounting the main unit on a wall. LG SJ8

1

10

Getting Started

Mounting the main unit on a wall

You can mount the main unit on a wall.

1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position.

>

Caution

Because it is difficult to make a connection after installing this unit, you should connect the cables before installation.

Preparation materials

Unit

2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.

Wall bracket install guide

Wall bracket

Screws

(Not supplied)

Screws (

A

)

Wall plug

3. Remove the Wall bracket install guide.

4. Fix the brackets with screws (

A

) as shown in the illustration below.

,

Note

Screws (

A

) and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti

(HUD-1 6 x 30) for the mounting.

5. Put the unit on the brackets to match screw holes on the bottom of the unit.

6. Fix the unit with the screws firmly.

,

Note

To detach the unit, perform it in reverse order.

>

Caution

y

Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury.

y

Do not hang onto the installed unit and avoid any impact to the unit.

y

Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product.

y

When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall.

Getting Started 11

1