Recording. Philips FW-V320, FW-V320/21

Recording

VCD MP3-CD MINI HIFI SYSTEM

STANDBY-ON

E

V

C

D

B

B

S

D

JOG

CONTROL

A

C D 1 • 2 • 3

VCD

PAL/NTSC

ALBUM +

BAND

TUNER

MP 3-CD

TAPE 1 • 2

TAPE

TITLE +

CDR/VIDEO

AUX

C

H

N

O

R

O

SEARCH•TUNING

STOP•CLEAR PLAY• PAUSE

DEMO STOP

PREV

▲

PRESET

▲

NEXT

INCREDIBLE

SURROUND

MICROPHONE - LEVEL

PBC RETURN CLOCK•TIMER

VOLUME

▲ OPEN

PLAY/ REC

TAPE 1

▲ OPEN

PLAYBACK

TAPE 2

FULL AUTO STOP

Notes:

– If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source.

– For recording, use only tape of IEC type I

(normal tape).

– The tape is secured at both ends with leader tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds.

– The recording level is set automatically, regardless of the position of VOLUME, Incredible

Surround, DSC or VEC.

– To prevent accidental recording, break out the tab on the left shoulder of the tape side that you want to protect.

– If "

CHECK TAPE" is displayed, the protection

tab has been broken. Put a piece of clear adhesive tape over the opening.

Recording the mixed sound /

One Touch Recording

¶ During microphone mixing, you can record the mixed sound on a tape in tape deck 2 except dubbing mode.

¶ For One Touch Recording, as soon as you press

RECORD, the current source (VCD, TUNER or

AUX) will be recorded on tape deck 2.

1

Load a blank tape in tape deck 2.

2

Press RECORD to start recording.

➜ The REC starts flashing.

3

Press Ç to stop recording.

Note:

– When you press RECORD while in TAPE mode,

"

SELECT SOURCE" will be displayed. One Touch

Recording is not possible in TAPE mode.

26 pg 01-32/V320/21-Eng 26

3139 115 20852

28/05/2001, 09:02 AM