- Home
- Domestic appliances
- Large home appliances
- Washing machines
- Electrolux
- 88840
- Operating instructions
advertisement
Operating Instructions
Running a washing cycle
Brief instructions
A washing cycle consists of the following steps:
0
1. Set the appropriate washing programme:
– Set the programme and temperature using the programme selector
– Select any programme options if required
2. Change the Spin Speed/select RINSE HOLD as necessary.
3. Set the DELAY TIMER as required.
4. Open the door and load the washing.
5. Close the door.
6. Add detergent/conditioner.
7. Start the washing programme by pressing the START/PAUSE button.
After the washing programme has ended:
Important! If the washing cycle has ended with a Rinse Hold, select
DRAIN, SPIN or SHORT SPIN before opening the door.
8. Open the door and remove the washing.
9. To switch off the washing machine, turn the programme selector to OFF.
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 10 Control panel
- 10 Programme selector
- 12 Programme option buttons
- 13 Programmable functions
- 14 Consumption values and programme times
- 14 Wash Time Display
- 15 What does "UPDATE" mean?
- 15 Anti-flood Aqua Control + Aqua Alarm
- 16 Before the first wash
- 16 Preparing for a wash cycle
- 16 Sorting and preparing the washing
- 17 Types of washing and care symbols
- 18 Detergents and Conditioners
- 18 Which detergent and conditioner?
- 18 How much detergent and conditioner?
- 18 Water softening
- 19 Running a washing cycle
- 19 Brief instructions
- 20 Setting the wash programme
- 21 Selecting Spin Speed /Rinse Hold
- 22 Setting the Delay Timer/Soaking time
- 23 Opening and closing the door
- 23 Loading the washing
- 24 Adding detergent/conditioners
- 25 Starting the wash programme
- 26 Wash programme progress
- 27 Washing cycle complete/removing the washing
- 29 Programme Tables
- 29 Washing
- 30 Separate Rinsing/Conditioning/Starching/Treating
- 30 Separate Spinning
- 31 Maintenance and Cleaning
- 31 Control panel
- 31 Detergent Dispenser Drawer
- 32 Washing Machine Drum
- 32 Main door
- 33 Cleaning the drain pump
- 34 What to do if...
- 34 Trouble Shooting
- 38 If the washing results are not satisfactory
- 39 Carrying out an emergency emptying
- 40 Emergency unlocking of the door
- 41 Additional rinse cycle (RINSE+)
- 42 Water cooling
- 42 Additional rinse cycle and water cooling
- 43 Variomatic spin
- 44 Programme Protection
- 45 Child Safety Feature
- 46 Installation Safety Precautions
- 47 Installation of the appliance
- 47 Transporting the appliance
- 47 Remove transport packaging
- 49 Installation-Site preparation
- 49 Installation on a Suspended Floor
- 50 Levelling the appliance
- 51 Electrical Connection
- 53 Water connection
- 53 Water pressure
- 54 Inlet Hose Connection
- 55 Water Drainage
- 56 Pump head of greater than 1m
- 57 Technical data
- 57 Dimensions