- Home
- Domestic appliances
- Large home appliances
- Washing machines
- Electrolux
- 88840
- Operating instructions
advertisement
38
Operating Instructions
If the washing results are not satisfactory
If the washing turns greyish and limescale deposits are present in the drum
• Insufficient detergent has been added.
• Incorrect detergent was used.
• Stains were not pre-treated.
• Programme or temperature was not set correctly.
• If using modular detergents, the individual components were not used in the correct ratio.
If there are still grey stains on the washing
• Soiled garments with ointments, grease or oils were washed with insufficient detergent.
• The temperature selected for the wash was too low.
• A frequent cause is that fabric softener - particularly a concentrated one - has come into contact with the washing. Wash out these types of stains as soon as possible and use the fabric softener carefully.
If after the last rinse foam is still visible
• Modern detergents can still cause foam in the final rinse cycle. However, the washing is still sufficiently rinsed.
If there are white residues on the washing
• These are insoluble contents of modern detergents. They are not the result of an insufficient rinse. Shake out the washing or brush it off.
Turn the washing inside out before washing it. Review your choice of detergent and if necessary use liquid detergent.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 10 Control panel
- 10 Programme selector
- 12 Programme option buttons
- 13 Programmable functions
- 14 Consumption values and programme times
- 14 Wash Time Display
- 15 What does "UPDATE" mean?
- 15 Anti-flood Aqua Control + Aqua Alarm
- 16 Before the first wash
- 16 Preparing for a wash cycle
- 16 Sorting and preparing the washing
- 17 Types of washing and care symbols
- 18 Detergents and Conditioners
- 18 Which detergent and conditioner?
- 18 How much detergent and conditioner?
- 18 Water softening
- 19 Running a washing cycle
- 19 Brief instructions
- 20 Setting the wash programme
- 21 Selecting Spin Speed /Rinse Hold
- 22 Setting the Delay Timer/Soaking time
- 23 Opening and closing the door
- 23 Loading the washing
- 24 Adding detergent/conditioners
- 25 Starting the wash programme
- 26 Wash programme progress
- 27 Washing cycle complete/removing the washing
- 29 Programme Tables
- 29 Washing
- 30 Separate Rinsing/Conditioning/Starching/Treating
- 30 Separate Spinning
- 31 Maintenance and Cleaning
- 31 Control panel
- 31 Detergent Dispenser Drawer
- 32 Washing Machine Drum
- 32 Main door
- 33 Cleaning the drain pump
- 34 What to do if...
- 34 Trouble Shooting
- 38 If the washing results are not satisfactory
- 39 Carrying out an emergency emptying
- 40 Emergency unlocking of the door
- 41 Additional rinse cycle (RINSE+)
- 42 Water cooling
- 42 Additional rinse cycle and water cooling
- 43 Variomatic spin
- 44 Programme Protection
- 45 Child Safety Feature
- 46 Installation Safety Precautions
- 47 Installation of the appliance
- 47 Transporting the appliance
- 47 Remove transport packaging
- 49 Installation-Site preparation
- 49 Installation on a Suspended Floor
- 50 Levelling the appliance
- 51 Electrical Connection
- 53 Water connection
- 53 Water pressure
- 54 Inlet Hose Connection
- 55 Water Drainage
- 56 Pump head of greater than 1m
- 57 Technical data
- 57 Dimensions