FEATURES. Honda Honda Engines GXV50, GXV57, GXV 57, GXV 50

Below you will find brief information for Engine GXV 50, Engine GXV 57. The GXV 50 and GXV 57 engines are designed for a variety of small engine applications, including lawn mowers, generators, and pumps. These engines are known for their durability, reliability, and fuel efficiency.

PDF Download

Document

07/06/01 12:37:33 32Z4D602_003

FEATURES

Centrifugal Clutch (applicable types)

BEFORE OPERATION CHECKS

IS YOUR ENGINE READY TO GO?

The centrifugal clutch automatically engages and transmits power when engine speed is increased above approximately 2,900 rpm.

At idle speed, the clutch is disengaged.

For your safety, and to maximize the service life of your equipment, it is very important to take a few moments before you operate the engine to check its condition. Be sure to take care of any problem you find, or have your servicing dealer correct it, before you operate the engine.

Do not run the engine without mounting it on equipment that includes the centrifugal clutch drum and housing, or centrifugal force will cause the clutch shoes to contact and damage the engine case.

Fuel Tank Vent

Improperly maintaining this engine, or failure to correct a problem before operation, can cause a malfunction in which you can be seriously hurt or killed.

The cap is provided with a vent knob to seal the fuel tank.

Open the fuel tank vent by turning the fuel cap vent knob at least 2 or 3 turns counterclockwise.

Always perform a pre-operation inspection before each operation, and correct any problem.

C L O S E

Before beginning your preoperation checks, be sure the engine is level and the engine switch on the equipment is in the OFF position.

O P E N

FUEL FILLER CAP

Always check the following items before you start the engine:

Check the General Condition of the Engine

FUEL CAP

VENT KNOB

Look around and underneath the engine for signs of oil or gasoline leaks.

Remove any excessive dirt or debris, especially around the muffler and recoil starter.

Look for signs of damage.

Check that all shields and covers are in place, and all nuts, bolts, and screws are tightened.

Check the Engine

Check the fuel level (see page 7 ). Starting with a full tank will

help to eliminate or reduce operating interruptions for refueling.

Check the engine oil level (see page 8 ). Running the engine

with a low oil level can cause engine damage.

Check the air filter element (see page 9 ). A dirty air filter

element will restrict air flow to the carburetor, reducing engine performance.

Check the equipment powered by this engine.

Review the instructions provided with the equipment powered by this engine for any precautions and procedures that should be followed before engine startup.

ENGLISH

Key features

4-stroke overhead valve design
Durable and reliable
Fuel efficient
Low emission
Easy to maintain

Frequently asked questions

Use unleaded gasoline with a pump octane rating of 86 or higher (a research octane rating of 91 or higher). You may use regular unleaded gasoline containing no more than 10% Ethanol (E10) or 5% Methanol by volume. Refer to page 7 for more details.

Every 10 hours (or every 3 months, whichever comes first). Check the engine oil level before each use. Refer to page 6 for the full maintenance schedule.

Use the original air filter provided by Honda. Always ensure the air filter is clean before operating the engine. Refer to page 9 for instructions on how to clean or replace the air filter.

FEATURES

BEFORE OPERATION CHECKS

What type of fuel should I use in my Honda GXV50 engine?

How often should I change the engine oil in my Honda GXV57 engine?

What type of air filter should I use in my Honda GXV engine?