003 BAND/AFC. LG Electronics 42CQ610H, 26LQ630H, 32LQ630H, 22LQ630H

Reference: Downloading a Splash Screen using a USB Memory Device

Splash Screen Image File Guidelines

•

The splash screen image must be a baseline (not progressive) 24-bit

JPEG.

•

•

•

•

•

The image should be no larger than 1 MB.

The ideal resolution of an image for the 26/32LQ630H is 1366 x 768 pixels (HD) or under and for the 22LQ630H is 1920 x 1080 pixels

(FHD) or under.

The ideal resolution of an image for the 42CQ610H is 1920 x 1080 pixels (FHD) or under.

TV Software Update (Expert)

The image file must be stored in a folder named “LG_DTV” in the root directory of USB memory device.

Ensure the USB device has been formatted with FAT format.

Downloading a Splash Screen Image

1. Turn the TV ON.

3. Press MENU on the Installer Remote to display the TV setup menus

(TV is in Pass-through Mode) or the Function Menu (TV is not in

Pass-through Mode).

LOGO Image Download

4. Use the arrow navigation keys to select/highlight either the menu icon from the TV setup menus or the

Option

Lock menu icon from the

Function Menu; then, press the number “ 7” key a total of seven times to display the USB Download Menu.

5. Use the Up/Down arrow keys to select Upgrade TV Software, and then press OK (Enter).

6. Use the Up/Down arrow keys to select the image file to download, and then press OK (Enter).

TV Software Update

The TV will show download completion progress in a new window. Do

NOT remove the USB device until the image download is complete.

When the image download is complete, the TV will reset itself with an automatic restart. Upon the restart, you should see the new splash screen.

54

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (TLX)

Previous

TV Software Update (Expert)

Enter

The following software files are found in the memory card.

Select the file you want to download to this TV or press EXIT to cancel the update.

Splash.jpg

TV Software Update (Expert)

[ Current TV Software Version Information ]

EPK : 01.26.00

The following software files are found in the memory card.

Select the file you want to download to this TV or press EXIT to cancel the update.

EPK :

[ Forced Update Option ]

SPI Boot

LOGO Image xxLQ630H_v1_27_00_USB

Upgrade PTC Software

TXT : V1.00.06

The following software files are found in the memory card.

[ Forced Update Option ]

Ext. MICOM

LOGO Image xxLQ630H_v1.00.07

SPI Boot

206-4207

Reference: Power Consumption Settings

The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 3 (default) and

Installer Menu item 099 BACK LIGHTING is set as shown below (default value for LQ630H TVs is

255; default value for CQ610H TVs is 100).

100

50

40

30

20

10

1

90

80

70

60

Item 099

Back Lighting

(Static)

22LQ630H

Power

Consumption

(Watts)

23.0

22.4

21.6

21.0

20.3

19.5

18.8

18.1

17.4

16.7

16.0

Percent

Savings

0.0%

3.5%

6.5%

8.7%

11.7%

15.2%

18.3%

21.7%

24.8%

27.4%

30.4%

26LQ630H

Power

Consumption

(Watts)

35.1

33.2

31.5

29.7

27.9

26.2

24.5

22.7

20.9

19.2

17.7

Percent

Savings

0.0%

5.4%

10.3%

15.4%

20.5%

25.4%

30.2%

35.3%

40.5%

45.3%

49.6%

32LQ630H

Power

Consumption

(Watts)

50.0

46.8

44.0

40.7

37.7

34.6

31.5

28.7

25.5

22.4

19.5

Percent

Savings

0.0%

6.4%

12.0%

18.6%

24.6%

30.8%

37.0%

42.6%

49.0%

55.2%

61.0%

42CQ610H

Power

Consumption

(Watts)

111.6

105.8

95.0

89.0

84.5

75.0

67.0

60.1

53.1

45.8

39.4

Percent

Savings

0.0%

5.2%

14.9%

20.3%

24.3%

32.8%

40.0%

46.1%

52.4%

59.0%

64.7%

200

150

140

130

120

110

101

190

180

170

160

Item 099

Back Lighting

(Dynamic)

22LQ630H

Power

Consumption

(Watts)

22.3

21.6

20.9

20.2

19.6

18.9

18.2

17.4

17.1

16.5

16.0

Percent

Savings

0.0%

3.1%

6.3%

9.4%

12.1%

15.2%

18.4%

22.0%

23.3%

26.0%

28.3%

26LQ630H

Power

Consumption

(Watts)

34.0

32.3

30.6

29.5

27.7

26.1

24.3

22.5

20.8

19.1

17.6

Percent

Savings

0.0%

5.0%

10.0%

13.2%

18.5%

23.2%

28.5%

33.8%

38.8%

43.8%

48.2%

32LQ630H

Power

Consumption

(Watts)

47.0

44.1

41.7

38.7

35.9

33.0

30.3

27.9

25.2

22.3

19.3

Percent

Savings

0.0%

6.2%

11.3%

17.7%

23.6%

29.8%

35.5%

40.6%

46.4%

52.6%

58.9%

42CQ610H

Power

Consumption

(Watts)

107.0

102.0

92.0

87.0

83.0

75.0

67.4

60.1

53.2

45.7

39.0

Percent

Savings

0.0%

4.7%

14.0%

18.7%

22.4%

29.9%

37.0%

43.8%

50.3%

57.3%

63.6%

Note: Values are results of controlled experiments under laboratory conditions.

206-4207

55

Reference: TV Aux Input Configuration

DIRECT ACCESS

Tuning

OLD_

OCV = 0

131

132

133

OLD_

OCV = 1

91

92

93

134 94

Source

Input

Video1

(Rear)

HDMI2

HDMI1/

DVI

RGB

TV

Source

Mode

CV/

SVIDEO

DTV/PC

DTV/PC

PC

Number

Installer Menu

ENABLE

Labeling

MPI DATA

STATUS TYPE

0x41 SOURCES

ENABLED (R/W)

Value Labeling

39

91

35

87

REAR AUX EN

YPrPb2 EN

COMPPORT EN

REAR RGB EN

0x02

Rear Video

(Aux)

0x04 S-Video Rear

0x08

0x10

Front

Computer

SVGA Rear

Computer

MPI DATA

DATA STATUS

TYPE 0xD2

CURRENT AV

SOURCE (R)

Value Labeling

DATA STATUS

TYPE 0x0D

AUX

SOURCE (R)

1

2

3

4

Rear Video

(Aux)

S-Video Rear

Front

Computer

SVGA Rear

Computer

0 (VIDEO)

0 (VIDEO)

0 (VIDEO)

2

(COMPUTER)

START AUX

SOURCE

ASSIGN-

MENT

1

5

3

4

56

206-4207

Reference: b-LAN Setup & Overview

The b-LAN module is internal to the TV. It allows hospital/institution head end equipment with b-LAN technology to communicate, via the institution’s RF distribution system, with the TV for configuration and control.

Installer Menu item 118 POWER SAVINGS controls the power circuitry for both the embedded b-LAN module and the GAME CONTROL/MPI port. The default value is 003—the b-LAN module as well as the

GAME CONTROL/MPI port circuitry is only powered when the TV is turned ON. See chart below.

POWER

SAVINGS

001

003 (default)

TV Standby State

b-LAN & GAME

CONTROL/MPI Port

Power

On

Off

TV Power On State

b-LAN & GAME

CONTROL/MPI Port

Power

On

On

A b-LAN enabled head end device, such as an LG FMA-LG101, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b-LAN module to receive communication from the head end device. At this point, if it is desired for the b-LAN module to always be powered, including while the TV is in Standby, set Installer

Menu item 118 POWER SAVINGS to 001.

Also, if MPI communication is required for external MPI control, set Installer Menu item 118 POWER

SAVINGS to 001 so that the GAME CONTROL/MPI port circuitry is always powered.

206-4207

57

Reference: LQ630H/CQ610H Hospital Operations

Hospital Features

The following table identifies when and how the LQ630H and CQ610H hospital features are supported in three different TV configurations. As indicated in the introduction to this document, LG commercial TV functionality is based on “ownership” of the Channel Map. For the purposes of this table, “CPU” indicates that the TV is in Pass-through Mode with the Channel Map in the CPU (i.e., auto-tuned/edited Channel

Map) and “PTC” indicates that the TV is in Pass-through Mode with the Channel Map in the PTC (i.e., after

2-5-5 + MENU).

Disabled

CPU

Enabled Disabled

PTC

Enabled

FTG/PPV Mode

Disabled Enabled Hospital Mode State

Installer Menu

IR Banks Enable

Scan Mode

Start Channel in Scan Mode

Feature Level

Bed 1/Bed 2

Multi-code IR

Speaker

Function Preview

Hospital Mode

Bed 1/Bed 2

Pillow Speaker Voltage

Speaker

Quick Shutoff

Item

025

027

027

027

027

077

012

013

014

020

020

020

020

(a)

X

X

(b)

X

(c)

(a)

X

X

X

X

(c)

X

X

X

X

X

X

(b)

(c)

X

X

X

(c)

X

X

X

X

X

X

X

X

(b)

X

X

X

X

Channel Banks

Number of Banks Enabled

Channel Preview/Banks Setup Menu

Blanked Channel

Inactive TV

SAP Key

1

X

X

4

X

X

X

X

X X

Aux Input Sources

Input List Menu

Aux in Scan List

X X X

X X

X

(d)

TV Setup Menus

Audio (TV Speaker)

Option (Power Indicator)

X = feature supported

(e)

X

(e)

X

(e)

X

(e)

X a) Turn ON function only. Always goes to channel 2-0.

b) Defaults to Zenith pillow speaker code/(+12v) supply voltage.

c) Quick Shutoff feature only functions when Scan Mode is enabled and if you are using an analog pillow speaker.

d) Dependent upon installer-defined Logical Channel Map.

e) Audio Menu is only accessible when the speaker selected is TV Only or both TV & Pillow.

X

(d)

58

206-4207