Last Number Redial. NEC DS1000, DS2000

80000mfh08-01.qxd 12/10/04 3:20 PM Page 126

Last Number Redial

Quickly select and redial the last outside number you dialed.

Last Number Redial allows you to quickly redial the last outside number you dialed. Quickly recall a busy or unanswered number without manually dialing the digits. Last Number Redial saves in the system memory the last 20 digits you dial, and can retain any combination of digits 0-9, # and *. The system remembers the digits regardless of whether the call was answered, unanswered or busy.

To redial your last call:

1.

(Optional) Press an idle line key to preselect a line for your call.

2.

Press .

Enhanced Last Number Redial

If enabled for your display telephone, Enhanced Last Number

Redial allows you to select from the last 5 outside numbers dialed.

When you place an outside call, the number dialed is stored in the

Enhanced Last Number Redial buffer. This buffer saves the 5 most recent numbers (including Speed Dial calls), with the most recent call at the top of the buffer and the oldest number at the bottom of the buffer. Old calls get pushed off the bottom of the buffer to make room for new calls at the top. If you dial a number that is already stored in the buffer, the system inserts the number at the top of the buffer and deletes the duplicate entry.

The numbers stored in the Enhanced Last Number Redial buffer are retained if the system resets or is powered down.

Ask your Communications Manager if you have Enhanced Last

Number Redial.

126