advertisement
4. Handling Incoming Calls
a. If On-hook Transfer is enabled for your extension, replace the handset or press the ON/OFF key.
b.
If On-hook Transfer is disabled for your extension, press the PROG key.
Note: On-hook Transfer requires system programming.
CALL PICKUP
The System allows the following types of Call Pickup:
• Extension Group Pickup
• Extension Direct Pickup
• Trunk Group Pickup
• Trunk Direct Pickup.
Extension Group Pickup
Extension Group Pickup allows you to pick up a direct ringing call (within your extension pickup group or in a different extension pickup group) without having to dial the number of the ringing extension.
Three types of Extension Group Pickup are available:
• Call Pickup-All Calls: you can pick up a direct call ringing anywhere within your own extension group.
• Call Pickup-External Calls: You can pick up only direct external calls ringing within your own extension group.
• Specified Group Pickup: You can pick up a call ringing to an extension in another extension group.
To use Extension Group Pickup - All Calls
1. Lift the handset or press the ON/OFF key.
2. Enter the Extension Group Pickup- All Calls code (default = 701 (HK/UK) or
701#).
3. Complete the call and replace handset or press the ON/OFF key.
To use Extension Group Pickup - External Calls
1. Lift the handset and press the ON/OFF key.
2. Enter the Extension Group Pickup-External Calls code (default = 702 (HK/UK) or 702#).
ICX-50-750 ICX (International), issued October 2000 61
4. Handling Incoming Calls
3. Complete the call and replace the handset or press the ON/OFF key.
To use Specified Group Pickup All Calls
1. Lift the handset or press the ON/OFF key.
2. Enter the Specified Group Pickup access code (default = 703 (HK/UK) or 703# ).
3. Enter the number of the Call Pickup Group (01-72) where the call is ringing.
4. Complete the call and replace the handset or press the ON/OFF key.
Extension Direct Pickup
Extension Direct Pickup allows you to answer a call to another extension by dialling the number of the ringing extension.
To use Extension Direct Pickup
1. Lift the handset or press the ON/OFF key.
2. Enter the Extension Direct Call Pickup code (default = 704 (HK/UK) or 704#).
3. Dial the number of the ringing extension.
4. Complete the call and replace the handset or press the ON/OFF key.
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO incoming trunk group.
To use Trunk Group Pickup
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Group Pickup code (default = 709 (HK/UK) or 709#).
3. Complete the call and replace the handset or press the ON/OFF key.
Trunk Direct Pickup
Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number.
To use Trunk Direct Pickup
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Direct Pickup code (default = *0).
62 ICX (International), issued October 2000 ICX-50-750
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 How to Use This Manual
- 7 What This Manual Contains
- 8 Notation Used
- 8 For More Information
- 9 Non-Display Phones
- 11 Small-Display Phones
- 13 Changing the Default Display
- 13 To display the Directory Mode on a small-display phone
- 13 Understanding Display Information
- 14 Using Variable Mode
- 14 To activate Variable Mode on a small-display phone
- 15 To use Variable Mode on a small-display phone
- 15 Large-Display Phones
- 17 Changing the Default Display
- 17 To display a directory or menu on a large-display phone
- 18 Understanding Display Information
- 21 Adjusting Volume and Display Settings
- 21 To adjust the volume of your phone while it is in use
- 21 To adjust the ringer volume of your phone while it is idle
- 22 To adjust the display contrast of your phone
- 22 Setting Up Flexible Function Keys
- 22 To set up FF keys
- 23 To clear an FF key’s programming
- 23 To check the FF key’s setup
- 23 Setting Up One-touch Keys
- 23 To program a one-touch key for an outside phone number
- 24 To assign an SSD number to a one-touch key
- 24 To assign a feature code or extension number to a one-touch key
- 24 To check a programmed one-touch key
- 25 Setting Up Speed Dialling
- 25 Assigning and Deleting PSD Numbers
- 26 To assign a PSD number to a one-touch or soft key
- 28 To delete a PSD number assigned to a one-touch or soft key
- 28 Assigning SSD Numbers
- 28 Linking System Speed Dial Numbers
- 29 To link speed dial numbers to a PSD bin
- 29 To use a PSD key that links multiple speed dial numbers
- 29 Assigning and Deleting Names for PSD Numbers
- 30 To assign a name to a PSD number
- 32 To delete a name assigned to a PSD number
- 33 Setting User maintenance Functions
- 35 To Enter User Maintenance Mode:
- 35 Absence Messages
- 36 Account Codes
- 37 Call Forwarding
- 38 Caller ID Call Log
- 38 Day/Night System Mode
- 40 Message Key
- 41 Name Assignments
- 42 Send Text Messages
- 43 Speed Dial
- 44 System Clock: Date/Time/Day
- 45 Text Message Replies
- 46 Voice Mail: Set Call-Forward ID Codes
- 46 Walking TRS Class of Service (Call Barring)
- 49 Accessing an Outside Line
- 49 To make an outside call using an outside line access code
- 49 To make an outside call using an FF key
- 50 To have a busy outside line call you back once it is open
- 50 To cancel a callback request
- 50 Using Account Codes
- 50 Non-verified Account Codes
- 50 To enter a non-verified account code before making a call
- 51 To enter a non-verified account code during a call
- 51 Verified Account Codes
- 51 To make an outside call that requires an account code
- 51 Redialing Outside Numbers
- 52 To redial the last number dialled
- 52 To automatically redial a busy number
- 52 To cancel automatic repeat dialling
- 52 Using Speed Dialling
- 52 Dialling Speed Dial Numbers
- 53 To dial a speed dial number by pressing a one-touch key
- 53 To dial a speed dial number using the soft keys on a small- display phone
- 53 To dial a speed dial number using the soft keys on a large- display phone
- 54 To dial a speed dial number by entering the speed dial bin number
- 54 Checking Speed Dial Numbers
- 54 To check a speed dial number using the soft keys on a small- display phone
- 55 To check a speed dial number using the soft keys on a large- display phone
- 55 To check speed dial entries by entering the speed dial bin number Display Phone is play Phone
- 57 Answering Calls
- 57 To answer a call
- 58 Using Call Hold
- 58 To place a call on hold
- 58 To use Broker’s Hold and toggle between two calls
- 58 To retrieve a call placed on hold, do one of the following:
- 59 Transferring Calls
- 59 Supervised Transfers
- 59 To supervise the transfer of a call to another extension or an outside number
- 60 Unsupervised Transfers
- 60 To transfer a call to another extension or an outside number without supervising the call
- 60 To transfer a call to a busy extension
- 61 Call Pickup
- 61 Extension Group Pickup
- 61 To use Extension Group Pickup - All Calls
- 61 To use Extension Group Pickup - External Calls
- 62 To use Specified Group Pickup All Calls
- 62 Extension Direct Pickup
- 62 To use Extension Direct Pickup
- 62 Trunk Group Pickup
- 62 To use Trunk Group Pickup
- 62 Trunk Direct Pickup
- 62 To use Trunk Direct Pickup
- 63 Call Park
- 63 To park a call on this extension
- 63 To retrieve a call parked at another Extension
- 63 To park a call at another extension
- 64 To retrieve a call parked on this extension
- 65 Calling Other Extensions
- 65 To call another extension by entering the extension number
- 65 To call another extension using the soft keys on a small-display phone
- 66 To call another extension using the soft keys on a large-display phone
- 66 Switching Between Tone and Voice Calling
- 66 To switch between tone to voice calling
- 67 Using Paging
- 67 To page another party or make an announcement
- 67 Answering a Page (Meet-Me Answer)
- 67 To answer a page using Meet-Me Answer
- 68 Answering a Page with Universal Night Answer
- 68 To answer a UNA call
- 68 To answer a UNA call using the assigned FF key
- 68 Making Announcements to Busy Extensions
- 68 To make an announcement
- 69 Answering an Announcement
- 69 To SPEAK TO THE ANNOUNCING PARTY
- 69 Transferring Calls with an Announcement
- 69 To transfer a call while making an announcement
- 69 Using Call Forwarding
- 70 To set Call Forwarding
- 71 To set for a PDN from an NPDN or PNPDN from an NPDN or PNPDN
- 71 To cancel Call Forwarding
- 72 To cancel Call Forwarding and DND for your extension in one step
- 72 Using Camp-on (Call Waiting)
- 73 To manually camp-on to a line and notify a party that they have a call waiting
- 73 To use Automatic Camp-on (Call Waiting)
- 74 To leave a text message while camp-on
- 74 To reply to a text message
- 74 To answer a Camp-on (Call Waiting) signal
- 75 Using Message Waiting/Callback
- 75 To send a Message Waiting/Callback request
- 75 To respond to a Message Waiting/Callback request
- 76 Using Do-Not-Disturb
- 76 To turn DND on
- 77 To cancel DND
- 77 Using Absence Messages
- 77 To assign the Absence Message
- 78 To cancel the Absence Message
- 78 Locking Your Extension
- 78 To activate the Station Lockout feature
- 78 To cancel the Station Lockout feature
- 79 To activate the Station Lockout feature for another extension
- 79 To cancel the Station Lockout feature for another extension
- 79 To change the Walking TRS/Station Lockout security code
- 81 Using the MIC Key
- 81 To block outgoing audio using the MIC key
- 82 Using Off-Hook Monitor
- 82 To put a call on speaker
- 82 Using Handsfree Answerback and Handsfree Operation
- 82 To answer calls without lifting the handset
- 82 To use system features without lifting the handset
- 83 Using Voice Recognition
- 83 Using the Flash Feature
- 83 Making Conference Calls
- 83 To establish a conference call
- 84 To establish a two party private conversation from a 3-party conference (Version 3.5 and higher)
- 84 To remove a busy tone (hang up) from an 8-party conference (Version 3.5 and higher)
- 84 To drop out of a conference call
- 84 Controlling Background Music
- 85 To turn background music on or off
- 85 Using Timed Reminders
- 85 To set a timed reminder (reminder alarm)
- 85 To cancel a timed reminder
- 85 Using Caller ID
- 85 Caller ID Call Log
- 86 Call Log Operation for a Small-display Phones
- 86 To view, dial or store the call log entry for a small-display phone
- 87 Call Log Format for the Large-Display Phone
- 87 To view, dial or store call log entry for a large-display phone
- 88 Walking TRS (Call BArring) Class of Service
- 88 To use a Walking TRS (Call Barring) COS code
- 89 Using Directory Numbers
- 90 To originate a call
- 91 To receive a call to a directory number (PDN or NPDN)
- 91 To originate a call using a non-primary directory number
- 91 To receive a call using a non-primary directory number
- 91 To call a primary directory number extension (NPDNs not called)
- 91 To transfer a call to the primary directory number extension (NPDNs not called)
- 92 Using Zip Mode
- 92 To enter or cancel Zip mode
- 92 Room Monitoring
- 93 Silent monitor