6
Create a name by using
V/v/B/b.
Press V/v repeatedly to select a character, then press b to move the cursor to the next position. Letters, numbers and other symbols can be input for a radio station name.
If you enter a wrong character
Press
B/b repeatedly until the character to be changed flashes, then press V/v repeatedly to select the desired character.
To erase the character, press B/b repeatedly until the character to be erased flashes, then press CLEAR.
7
Press .
“COMPLETE” appears in the display and the station name is stored.
8
Press MENU/HOME.
Viewing the station name or frequency in the display
When the receiver is set to “FM” or “AM”, you can check the frequency using the display.
Press DISPLAY.
Each time you press DISPLAY, the display changes as shown.
Station name a) y Frequency b) a)
This is displayed if you have entered a name for a preset station.
b)
Returns to the original display when several seconds have elapsed.
Using “BRAVIA” Sync features
What is “BRAVIA” Sync?
“BRAVIA” Sync is compatible with a Sony
TV, Blu-ray Disc/DVD Player, AV amplifier, etc., that is equipped with the Control for
HDMI function.
By connecting Sony components that are compatible with the “BRAVIA” Sync with an
HDMI cable (not supplied), operation is simplified as follows:
• One-Touch Play: When you play back a component such as a DVD/Blu-ray disc player, the receiver and the TV are turned on automatically and switched to the appropriate HDMI input. Be sure that the
System Audio Control setting is set to on.
• System Audio Control: While watching TV, you can select to output the sound from the
TV speaker or the speakers connected to the receiver.
• System Power Off: When you turn off the
TV, the receiver and connected components are also turned off simultaneously.
Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer
Electronics Control) for HDMI (High-
Definition Multimedia Interface).
The Control for HDMI function does not work in the following cases:
• When you connect the receiver to a component which does not correspond with
Sony’s Control for HDMI function.
• When you connect the receiver and components using other than HDMI connection.
We recommend that you connect the receiver to products featuring “BRAVIA” Sync.
continued
45
US
Note
Depending on the connected component, the
Control for HDMI function may not work. Refer to the operating instructions of the component.
Preparing for the
“BRAVIA” Sync
To use the “BRAVIA” Sync, set the Control for HDMI function to on for both the receiver and the connected component. The receiver is compatible with the “Control for HDMI-Easy
Setting” function.
When your TV is compatible with the “Control for HDMI-Easy
Setting” function
When you connect a Sony TV with the
“Control for HDMI-Easy Setting” function, the Control for HDMI function of the receiver can be turned on simultaneously by turning the
Control for HDMI function of the TV on.
1
Make sure that the receiver, TV, and playback components are connected using an HDMI cable (not supplied).
(The respective components must be compatible with the Control for HDMI function.)
2
Turn on the receiver, TV and playback components.
3
Turn the Control for HDMI function of the TV on.
The Control for HDMI function of this receiver and all the connected components are simultaneously turned on.
During setup, “SCANNING” appears in the display, and once setting is completed,
“COMPLETE” will appear. Wait until the setup is complete.
For details on setting the TV, refer to the operating instructions supplied with the TV.
46
US
When your TV is not compatible with the “Control for HDMI-Easy
Setting” function
Turn the Control for HDMI function of the receiver and the connected component on individually.
7
CLEAR
DISPLAY
8
0
SOUND
FIELD
9
ENTER
AMP MENU
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
,
V,v,B,b
AMP
MENU
RETURN/EXIT MENU/HOME
1
Perform the steps given in “When your
TV is compatible with the “Control for
HDMI-Easy Setting” function” (page
46).
2
Press AMP MENU.
“SET HDMI” appears on the display.
3
Press or b to enter the menu.
4
Press V/v repeatedly to select
“CONTROL FOR HDMI”.
“CONTROL FOR HDMI” scrolls across the display, then “CONTROL” appears.
5
Press or b to enter the parameter.
6
Press V/v repeatedly to select “CTRL
ON”.
Control for HDMI function is activated.
7
Set the Control for HDMI function of the connected component to on.
8
Select the HDMI input (BD, DVD, SAT) of the receiver and TV to match the
HDMI output of the connected component, so that the image from the connected component is displayed.
For details on setting the TV and connected components, refer to the operating instructions of the respective components.
Notes
• You cannot perform One-Touch Play and System
Audio Control during Control for HDMI-Easy
Setting operation.
• Before you do the Control for HDMI-Easy Setting from the TV, be sure to turn on the TV, connected components and receiver.
• When you unplug the HDMI cable or change the
connection, perform the steps given in “When your
TV is compatible with the “Control for HDMI-
Easy Setting” function” (page 46) or “When your
TV is not compatible with the “Control for HDMI-
Easy Setting” function” (page 47).
• If the playback components cannot function after you have made the settings for Control for HDMI-
Easy Setting, check the Control for HDMI setting on your TV.
• If the connected components do not support the
Control for HDMI-Easy Setting, you need to set the Control for HDMI function for the connected components to on before you perform the Control for HDMI-Easy Setting from the TV.
47
US
Playing back components with one-touch operation
(One-Touch Play)
You can enjoy sound and image from the components connected to the receiver via
HDMI connections by a simple operation.
Play back a connected component.
The receiver and the TV are turned on automatically and switched to the appropriate
HDMI input.
Note
Be sure that the System Audio Control setting is set to on.
Watching a DVD/Blu-ray disc by simple operation
You can also select a connected component, such as a DVD/Blu-ray disc player using the
TV menu. In this case, the receiver and the TV switch to the appropriate HDMI input.
Note
Depending on the TV, the start of the content may not be output.
Tip
You can enjoy the components that are connected to the HDMI jacks, even if you turn the receiver off.
The ACTIVE STANDBY indicator lights up in amber.
Enjoying the TV sound from the speakers connected to the receiver
(System Audio Control)
You can enjoy the TV sound from the speakers connected to the receiver by a simple operation.
You can operate System Audio Control function using the TV menu. For details, refer to the operating instructions supplied with the
TV.
When System Audio Control function is turned on, the receiver will turns on and switches to the appropriate input automatically.
TV sound is output from the speakers connected to the receiver, and the volume of the TV is minimized simultaneously.
You can use the System Audio Control function as follows.
• If you turn on the receiver while the TV is turned on, the System Audio Control function will automatically be set to on and the TV sound will output from the speakers connected to the receiver. However, if you turn off the receiver, the sound will output from the TV speakers.
• You can adjust the receiver’s volume when you adjust the TV volume.
Notes
• If System Audio Control does not function according to your TV setting, refer to the operating instructions supplied with the TV.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control function does not work.
• If the TV is turned on before turning on the receiver, the TV sound will not be output for a moment.
48
US
Using the Volume Limit function
When the System Audio Control function is active, and the output method changes from the TV speaker to the speakers connected to the receiver automatically, loud sound may be output depending on the volume level of the receiver. You can prevent this by limiting the maximum volume level.
1
Press AMP MENU.
2
Press
v/V repeatedly until “SET
HDMI” appears, then press or
b.
3
Press
v/V repeatedly until “VOL
LIM” appears, then press or
b.
4
Press
v/V to select the
maximum volume level you want.
The maximum volume level changes as follows:
MAX y 39 y 38 y ...... y 2 y 1 y MIN
5
Press AMP MENU.
The AMP MENU turns off.
Notes
• This function is available only when the Control for HDMI function is set to on.
• This function is not available when the output method changes from the speakers connected to the receiver to the TV speaker.
Tips
• Sony recommends that you set the maximum volume level to a little lower than the volume you usually listen to.
• Regardless of the maximum volume level you set, the MASTER VOLUME on the receiver and the
MASTER VOL +/– button of the remote are operable.
• If you do not want to limit the maximum volume level, select “MAX.”
Turning off the receiver with the TV
(System Power Off)
When you turn the TV off by using the
POWER button on the TV’s remote, the receiver and the connected components turn off automatically.
You can also use the receiver’s remote to turn off the TV.
TV INPUT DMPORT
TV ?/1
AV ?/1
?/1
VIDEO1 VIDEO2
SYSTEM STANDBY
BD DVD
SAT TV SA-CD/CD TUNER
BD/DVD
TOP MENU MENU
JUMP
1
PICTURE
2
4
7
5
8
0
F1 F2
WIDE FAVORITES
THEATER
3
GUIDE
6
SOUND
FIELD
9
ENTER
AMP MENU
CLEAR
DISPLAY
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
TV
RETURN/EXIT
TV CH –
PRESET –
.
MENU/HOME
REPLAY ADVANCE
< <
TV CH +
PRESET +
>
TUNING –
m H
TUNING +
M
TV
X x
TV ?/1
Press TV and TV ?/1 at the same
time.
The TV, receiver and the components connected via HDMI are turned off.
Notes
• Set the TV Standby Synchro to “ON” before using the System Power Off function. For details, refer to the operating instructions supplied with the TV.
• Depending on the status, the connected components may not be turned off. For details, refer to the operating instructions supplied with the connected components.
49
US
Using the Power Saving function
(Power Save)
You can reduce the receiver’s power consumption when you connect a “BRAVIA”
Sync-compatible TV to this receiver during active standby mode if the TV is turned off and
HDMI signal transmission is stopped.
4
7
CLEAR
DISPLAY
5
8
0
GUIDE
6
SOUND
FIELD
9
ENTER
AMP MENU
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
,
V,v,B,b
AMP
MENU
RETURN/EXIT
TV CH –
PRESET –
.
MENU/HOME
REPLAY ADVANCE
< <
TV CH +
PRESET +
>
1
Press AMP MENU.
“SET HDMI” appears on the display.
2
Press or
b to enter the
menu.
3
Press
V/v repeatedly to select
“P.SAVE”, then press or
b.
4
Press
V/v repeatedly to select
the setting, then press or
b.
• SAVE ON: Reduces power consumption in standby mode. HDMI signal transmission occurs only when the TV is on.
• SAVE OFF: No reduction. HDMI signal transmission occurs continuously.
5
Press AMP MENU.
The AMP MENU turns off.
Notes
• The power saving function may not work for some
TVs compatible with the “BRAVIA” Sync. In this case, set “P.SAVE” to “SAVE OFF.”
• Depending on your components, it may take time before image or sound is output.
• This function is available only when the Control for HDMI function is set to on.
50
US
