Sony 4-169-142-11(1) Blu

Sony 4-169-142-11(1) Blu

Hookups and

Settings

Step 1: Preparing the

Player

Checking the supplied accessories

Check that you have the following items:

• Remote commander (remote) (1)

• R6 (size AA) batteries (2)

Preparing the remote

Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment.

9

Step 2: Connecting the Player

Do not connect the mains lead until you have made all the connections.

Connecting to your TV

Select one of the following connection methods according to the input jacks on your TV.

Match the colour of the plug to that of the jack when connecting.

HDMI cable (not supplied)

Audio/video cable (not supplied)

High quality

Component video cable

(not supplied)

Audio/video cable (not supplied)

10

Standard quality b

Do not connect the player through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.

Connecting to your AV amplifier (receiver)

Select one of the following connection methods according to the input jacks on your AV amplifier (receiver). When you select A or B, make the appropriate settings in the “Audio

Settings” setup (page 20).

*1

HDMI cable (not supplied)

HDMI cable

(not supplied)

t Set “BD Audio MIX Setting” (page 20).

Coaxial digital cable (not supplied) or

Optical digital cable (not supplied) t Set “Dolby Digital (Coaxial / Optical)

*1 and “DTS (Coaxial / Optical)

*2

” (page 20)

” (page 20).

Audio/video cable (not supplied)

*2

11

12

Step 3: Easy Setup

When turned on for the first time

Wait for a short while before the player turns on and starts “Easy Setup.”

1

Plug the player into the mains.

Connecting to the

Network

Wired Setup

Use a LAN cable to connect to the LAN (100) terminal on the player.

to mains

2

Press [/1 to turn on the player.

LAN cable

(not supplied)

Broadband router

ADSL modem/

Cable modem

Internet

3

Turn on the TV, then switch the input selector on your TV so that the signal from the player appears on your TV screen.

To set the network settings

Select “Network Settings,” “Internet

Settings,” then “Wired Setup” (page 24), and

follow the on-screen instructions to complete the setup.

USB Wireless Setup

Turn off the player, then connect the USB

Wireless LAN Adapter (UWA-BR100 only available as of January 2010) to the USB jack on the front or rear of the player.

b

The USB Wireless LAN Adapter may not be available in some regions/countries.

USB Wireless

LAN Adapter

4

Perform “Easy Setup.”

Follow the on-screen instructions to make the basic settings using

</M/m/

, and ENTER on the remote.

LAN cable

(not supplied)

Wireless LAN router

ADSL modem/

Cable modem

Internet

</M/m/,

ENTER

To set the network settings

Select “Network Settings,” “Internet

Settings,” then “USB Wireless Setup”

(page 24), and follow the on-screen

instructions to complete the setup.

13

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project