STEREO LINE INPUT MODULE. SV Sound SX-VT, SX-ST

5. Stereo Line Input Module

The Stereo Input Module is available for the SONOSAX SX-VT series only. It accepts stereo line signals from –14dBu to +25dBu.

The Stereo Line Input module is VCA controlled and can be automated from an external device or controlled from an optional built in Master VCA Group Fader if the mixer is equipped with a VCA Grouping system.

In following sections, the "Post Fader" signal is obviously always Post VCA and the "Pre Fader" is always Pre VCA.

Please keep in mind that the Balance L / R potentiometer is part of the VCA circuitries and therefore all Post Fader signal are affected by the Balance.

SX-ST / SX-SV User Manual page 18