P,oneer
sound vision. soul
MULTI-COMPACT
DISC PLAYER
COMPACT DISC POUR
MULTI-LECTURE
CDX-P1280
CDX-P680
Owner's Manual
Mode d'emploi
<KFJFF/OOHOOOOO> <CRD3728-A/N> UC
This product conforms to CEMA cord colors.
Le code de couleur des cables utilise pour ce produit est conforme
CEMA.
a
Precautions/Precautions
- - - - - - - - -
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
__. _ .
... _ , ----J
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUIV1ENTS WITH THIS PRODUCT
WILL INCREASE EYE HAZARD.
o
• When driving on an uneven road, the player may not reproduce every sound properly.
During winter the inside of the vehicle may be very cold. If the heater is turned on and the player is used soon after, the disc or optical parts
(prism, lens, etc.) may become misted up, and the player will not operate correctly. If the disc is misted up, wipe it with a soft cloth. If the optical parts are misted up, wait for about an hour for them to warm up. They will return to their normal condition.
- - - _ . _ - - _
. . .
_--------_
..
- _ . , _
...
_ - - - - - - - - -
After-sales service for Pioneer products
Please contact the dealer or distributor from where you purchased the product for its aftersales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below:
Please do not ship your product to the companies at the addresses listed below for repair without advance contact.
USA CANADA
Pioneer Electronics (USA), Inc.
CUSTOMER SUPPORT DIVI
SION
P.O. Box 1760,
Long Beach, CA 90801-1760,
(BOO) 421·1404
Pioneer Electronics of
Canada, Inc.
CUSTOMER SATISFACTION
DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R OP2
(90S)
479-4411
'I
-877-283-5901
For wan'anty information plea:;e see ihe Limited Warranty sheet included with your product.
CAUTION:
With this player, you can use the ITS functions to store up to 99 tracks per disc.
Even if the Head unit's manual indicates ITS memory is up to 24 tracks per disc, this player can store up to 99 tracks per disc.
When playing a CD TEXT disc on this product, display of Title indications in the head unit's display is possible. For details concerning CD TEXT discs, refer to the head unit's owner's manual.
This product conforms to the track skip function of the CD-R disc.
The tracks containing the irack skip information are skipped over automatically.
Important
The serial number of this device is locClted on the rear of the unit.
For youl own security and conveniell(8, be Slife to record this nUIllbel' on the enclosed warranty card
Precautions when handling magazines
• Do not put the magazine in a place where it will be exposed to high temperatures or direct sunlight
• Do not disassemble the magazine.
• Take care not to drop the magazine or knock it against anything.
• Do not use cracked or warped trays.
• Never insert anything other than discs. Do not attach a label or tape to a disc.
• The use of benzine, thinner, insecticide, or other volatile chemicals may damage the magazine surface.
Extra magazines
If you need more magazines, please ask your nearest dealer for magazine JD-1212S. (for CDX-P1280) or JD-612V (for CDX-P680)
Attaching the label
Attach the supplied label in the specified position. Attaching the label in an incorrect place or attaching more than one label will cause malfunction.
Inserting discs
• Be sure to remove the disc before changing a disc tray.
• If the tray is not aligned with the right and left grooves, it cannot be pushed to the end. Do not bend or force the tray.
• Always load 12 trays in a magazine to prevent loss or warping of trays.
• If you load a disc with the label generally printed in black facing down, not only will the player not be able to recognize whether the disc is set or not, but also, if you have a multi-CD controller, the controller will not display an error message to let you know about it So make sure all the discs in each magazine have their label sides facing up.
Loading and removing the magazine
o
~
• Do not put your fingers in the magazine tray as this may lead to incorrect operation and damage to the player.
If the label on the magazine is coming off or wrinkled up, it may damage the eject mechanism, and in some cases, the magazine may not be ejected. Therefore, remove a damaged label completely before use.
Never leave the door open while playing discs. The entry of dirt, dust, or any other foreign matter into the player may cause it to fail.
Discs/Disques
~:
:
:
.
r!lCOMPACT
l.Qj0
~
(]5
DIGITAL AUDIO
DIGITAL AUDIO r!lCOMPACT
l.QjO~(]5
I
TEXT
I
• Use only use magazines and discs carrying the above marks.
• This product is designed for use with conventional, fully circular CDs only. Use of shaped CDs are not recommended for this product.
<9
~
• Check all CDs before playing, and discard cracked, scratched or warped discs.
• Avoid touching the recorded (iridescent) surface when handling discs.
• Do not affix labels or apply chemicals to discs.
• Wipe dirty or damp discs outward from the center with a soft cloth.
• Keep discs out of direct sunlight and high temperatures.
• Normal playback of CD-R discs other than those recorded with a music CD recorder may not be possible.
• Playback of music CD-R discs, even those recorded with a music
CD recorder, may not be possible with this product due to disc characteristics or scratches or dirt on the disc. Dirt or condensation on the lens inside this product may also prevent playback.
• Read the precautions with the CD-R discs before using.
Loading a magazine in the multi CD player/Mise en place
The figure shows this product with CDX-P1280 as an example.lL'illustration montre, a titre d'exemple
1
Inserting discs/Mise en place des disques
Slide out the disc tray
Extr lateau it disque
Jnsert,discs wjth the laO\'llside up,
Introduisez les disques de fayon que
I'etiquette so it toumee vers Ie haul.
~
"""=---
Disc tray
Plateau
(,..!"'.;
Hold down the magazine lock button and pull the tray out.
~
Appuyez sur Ie bouton de verrouillage et tirez a vous un plateau.
9
10
7
8
IJ
12
I
6
~ l
1st to 12th discs
Ordre des
12 disques
Notes on 8-em (3-inchl CDs
• Do not use an 8-em CD adapter. If it is used, the player may fail. To load an 8-em
CD, you need a special 8-em CD tray (Part
No.
CXB5931).
Ask your Pioneer service station about it.
Rell)arque surJes diSques de
8cm:
• N'utilisez pas d'ad~ptafeurpo4rpisqu~ de'8 .
em, faute de quoile lebfeur p6urri:litpep.8$
?'Q; fonetionner.
Pourrnettre~l1pla'Ce:undi$que
'S de 8 cm, vousdeyez,utili~erun pl&teau'spg-> cial(numero depieee
CXB59B1
),L,ese'i"\liceg', d'ehtretien Pioneervol,ls renseigmlra'utile-,;
•menta ee sujet.
'
' p '
Changing disc trays/Remplacement des plateaux pour disque
Gently PIJ]J the disc tray out.
Tirez doucement Ie plateau a vous.
Disc tray
Plateau
Align the disc tray with the left and right grooves, and.pushit in until you hear it
......._..,;.._ _
,.~""'·.;.;';~"'m.'"'"""'".'
.,. _,
~ click.
Engagez a fond Ie plateau pour disque dans les rainures droite et gauche.
2
Loading the magazine/Mise en place d'un chargeur
Slide and open the door.
Open it fully until it locks with a click.
Faites glisser Ie volet.
Ouvrez-Ie completement; il se verrouille et vous entendez un dedic.
To remove the magazine/Pour retirer Ie chargeur
Load the magazine and close the door.
Introduisez Ie chargeur
Insert the magazine with the arrow upward.
.'.._..,.;
~ i
I
1 de maniere que la face portant la fleche soit tournee vers Ie haul.
,
'w_,..•_.,_.
.-,.~""""--~ ~
_..;.
~ ~
Press the eject hutton
Appuyez sur Ie bouton d'ejection.
Transportation of multi-CD Player/
Transport du lecteur de CD
a
chargeur
"0
~
Transport screw
Vis de transport
Replacez ces vis dans leur position d'origine avant de transporter I'appareil.
A transport screw has been attached to the set in order to protect it during transportation. After removing the transport screw, cover the hole with the supplied seal. Be sure to remove the transport screw before mounting the set. The removed transport screw should be retained in the accessory bag for use the next time the set is transported.
Des vis sont fixees sur Ie lecteur de fa~on a
Ie proteger pendant Ie transport. Aprils avoir retire une vis de transport, bouchez Ie trou au moyen du cache fourni. Veillez a retirer ces vis avant d'installer Ie lecteur. Conservez les vis dans Ie sac contenant les accessoires de maniere a ne pas les egarer et a etre en mesure de les remettre en place en cas de transport.
Error Mode/Codes d'erreur
If there is a problem with CD play, error codes will be displayed on connected CD controller's display
(ex. E-ll, Err-ll, ERR-ll, ERROR-ll).
If an error is displayed, refer to the table below to identify the problem. If the error is displayed even after corrective action is taken, contact your dealer or the nearest authorized PIONEER Service
Station.
E: Error number
C: Cause
T: Treatment
E: 11,12,14,17,30
C: The disc is dirty.
T: Clean the disc.
E: 11,12,17,30
C: The disc is scratched.
T: Replace the disc.
E: 11,12,14,17
C: The disc is inserted with the label side down.
T: Insert the disc with the label side up.
E: 14
C: An unrecorded CD-R is being used.
T: Check the disc.
E:
44
C: All tracks are setting track skip.
T: Replace the disc.
E: NO DISC
C: An empty magazine is in the multi CD player.
T: Insert discs into the magazine.
E: 10,11,12,14,17,19,30,50,60,70, AO, Al
C: Electrical or mechanical fault.
T: Turn the car ignition switch off and on again, or press the source switch on the multi-CD controller to set CD playback again.
En cas d'anomalie pendant la lecture d'un disque, un code d'erreur est affiche par Ie controleur relie au lecteur
(par exemple, E-l1, Err-ll, ERR-ll, ERROR-11).
En ce cas, reportez-vous au tableau suivant pour connaitre la cause de I'anomalie. Si Ie code d'erreur demeure affiche apres que vous avez pris les mesures correctives, adressez-vous 8 un centre d'entretien Pioneer.
N: Code d'erreur
C: Cause
M: Mesure corrective
N: 11,12,14,17,30
C: Le disque est sale.
M: Nettoyez Ie disque.
N: 11,12,17,30
C: Le disque est raye.
M: Remplacez Ie disque.
N: 11, 12, 14, 17
C: Le disque a ete mis en place de telle maniere que I'etiquette est tournee vers Ie bas.
M: Placez Ie disque de fa(:on que I'etiquette soit tournee vers Ie hant.
N: 14
C: Le disque, un CD-R, ne porte aucun enregistrement.
M: Verifiez Ie disque.
N: 44
C: Toutes les plages sont reg lees comme plage 8 sauter.
M: Remplacez Ie disque.
N: NO DISC
C: Le chargeur est vide.
M: Introduisez un chargeur contenant des disques.
N: 10,11,12,14,17,19,30,50,60,70, AO, Al
C: Anomalie electrique ou mecanique.
M: Placez Ie contacteur d'allumage sur la position Arret puis 8 nouveau sur la position Marche, ou encore appuyez sur Ie selecteur de source du controleur pour lecteur de CD 8 chargeur.
Specifications/Specifications
General
(CDX-P1280)
System
Usable discs
Signal format
Power source
Max. current consumption
Weight
Dimensions
Compact disc audio system
Compact Disc
Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
14.4 V DC
(10.8 15.1 V allowable)
1.0 A
2.2 kg (4.9 Ibs.)
257 (W) x 94 (H) x 170 (D) mm
[10-1/8 (W) x 3-3/4 (H) x 6-3/4 (D) in.]
(CDX-P680)
System
Usable discs
Signal format
Power sou rce
Max. current consumption
Weight
Dimensions
Compact disc audio system
Compact Disc
Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
14.4 V DC
(10.8 15.1 V allowable)
1.0 A
1.9 kg (4.2 Ibs.)
248 (W) x 66 (H) x 168 (D) mm
[9-3/4 (W) x 2-5/8 (H) x 6-5/8 (D) in.l
Audio
Frequency characteristics
Signal-to-noise ratio
Distortion
Dynamic range
Output level
Number of channels
5 20,000 Hz
(±
1 dB)
92 dB (1 kHz) (IHF-A Network)
0.006 %
..
1,000 mV (1 kHz,
°
dB)
2 (stereo)
Note:
Specifications and design are subject to possible modification without prior notice due to improvements.
Generalites
(CDX-P1280)
Systeme
Disques utilisables
Format du signal
Compact Disc Digital Audio
Compact Disc
Frequence d'echantillonnage: 44,1 kHz
Nombre de bits de quantification: 16;
(quantification lineaire)
Alimentation 14,4 V CC
(toute tension comprise entre 10,8 et 15,1 Vest admissible)
Consommation maximale
Poids
Dimensions
1,0 A
2,2 kg
257 (L) x 94 (H) x 170
(P) mm
(CDX-P680)
Systeme
Disques utilisables
Format du signal
Compact Disc Digital Audio
Compact Disc
Frequence d'echantillonnage: 44,1 kHz
Nombre de bits de quantification: 16;
Alimentation
(quantification Iineaire)
14,4 V CC
(to ute tension comprise entre 10,8 et 15,1 Vest admissible)
Consommation maximale 1,0 A
Poids
Dimensions
1,9 kg
248
(l) x 66 (H) x 168 (P) mm
Audio
Reponse en frequence
Rapport signal/bruit
Distorsion
Dynamique
Niveau de sortie
Nombre de voies
5 Hz 8 20 kHz
(±
1 dB)
92 dB (81kHz) (reseau IHF-A)
0,006%
90 dB (81kHz)
1.000 mV (81kHz,
°
dB)
2 (stereo)
Note:
A fin d'amelioration, les caracteristiques et la presentation peuvent etre modifiees sans avis prealable.
Connecting the {lnits/Connexion des appareils
IP-BUS cable
To pl'event incorrect connection, the input side of the IP-BUS connector is colored in blue, and the output side in black. Connect the connectors of the same colors GOrrectly,
Cable Ip·BUS
Pour eviter toute erreur de branchement, Ie cote entree du cable IP-BUS est bleu et Ie cote sortie est noir, Tenez compte de ces couleurs
101'5 des raccordements.
Multi·CD controller
Controleur pour lecteur de CD
6m (1ft. 12in.l
~ it chargeur
Fuse holder
Porte·fusible lP'8US, (black)
IP-BUS (nair)
Yellow
To the terminal always supplied with power regardless of ignition switch position.
Jaune
Vers une borne alimentee en permanence, independamment de la position de la cle de contact.
Black (ground)
_______ To
the vehicle
(metal) nady.
Nair (masse)
Vers la carrosserie (masse) du vehicule.
(._»...•
".".i
~
•• __
.~."."
••.",;.;__
'_~
..__
~"~~'~.* ~"' ___
'I
Cords for th is prQd.
...
:.th.OS.J~.
may be different colorseveniH
• .
" .
' function. When cOllnectlpg, product, refer to th!'\~\.IppJi,eq
I of both products ariel cq~he¢tc()r
, same function.
'I
Les cables de cetappatE111 et¢e,LI>( / peuvent fort bien ne pasetredelll'
I bien que rempli$sant larneme:fol'lc
I cetappareil a
\.In
C!utreC!Pp~re.jI,!J
' d'installation dediacurieteffe raccordements en ne tenant
. . . . .
compt'e:gue'Q
I fonction de chaq\.le dible. .
'. '.. .: , ' , / \ ; .
\Jnk@ljft1\IflillJtM1LMi\t~n:fWC~T.w4illiJj;Bl1IIltL1L,_J.It!l£ttt@t§f M~t~~
• Before mounting, connect the units temporarily. Check that the units are connected correctly by operating the multi-CD controller.
• After connection is complete, press the clear buttons on the player and the multi-CD controller with the tip of a pencil.
• Be sure to connect the ground lead (black) to the vehicle body or some other metal part that is properly grounded to the chassis. If the ground lead is not properly connected, noise may occur or the player or multi-CD controller may not operate correctly.
• This product is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage.
• To avoid shorts in the electrical system, be sure to disconnect the battery (-) cable before beginning installation.
• Check whether installation and wiring have been completed correctly. Replace the removed car components, then connect the end of the cable to the negative (-) terminal of the battery.
• Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts.
• Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake, and seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body.
• Don't pass the yellow lead through a hole into the engine compartment to connect to the battery. This will damage the lead insulation and cause a very dangerous short.
• Do not shorten any leads. If you do, the protection circuit may fail to work when it should.
• Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing over heatmg.
• Replace fuses only with the types stipulated on the fuse holder.
• Even if the power is cut off because the power cord is removed or the battery is replaced, the CD title display and ITS memory are retained for 24 hours.
o o o o
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
When mounting the player, make sure none of the leads are trapped between the player and the sun ounding metalwork or fittings,
location
D o o o e)
"
~nstall the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an enlergency stop.
Be sure to mount the player on a rigid surface which is firm enough to hold the player in the proper position under all circurn stances. Failu re to do so rllay affect the optimum performance of o the player.
" Before drilling a hole into the trunk, confirm that there is nothing behind the hole. Never drill a hole in the fuel tank or any other important part.
Do not Illount the player near the heater outlet, where it would be affected by heat, or near the doors, vvhere rainwater might splash onto it.
Do not Illount the player on the spare ti re board or any other unstable place.
Mount the player in a place where it does not prevent the spare tire, jack, or tools from being easily ,-emoved.
Do not mount the player in areas of direct sun light, and so becomes hot, like on the dashboard or the rear shelf.
Mount the player on a flat surface.
Suspending the player from the parcel shelf with
hex c
screws
., Ideally, when the player is being Illounted under the parcel shelt two persons should work togpthet,
One person should hold the player, and the other should tighten the hex-nuts. If you do this job on your own, take great care not to drop or knock the player.
• When suspending the player under the parcel shelf, be sure that it is firmly installed on a solid surface. If the unit is not firmly installed, skipping will occur.
Installation
Mounting the player on the mounting board with self-tapping screwsl
Fixation du lecteur sur une platine
a
I' aide de vis autotaraudeuses
1
HorizontallyIHorizontalement Vertically/Verticalement
2
Platine
Put marks,
Marquez ces emplacements,
Use the holes indicated with arrows
Percez les trous indiques par les fiElphes.
®
0 t t
0
0
0
3
Platine
Marquez ces emplacements.
<jJ
4 - 4,5 mm
The following steps are the same for horizontal or vertical installation,
Les operations suivantes sont les memes, que
I'installation de I'appareil soit verticale ou horizontale.
1
Mounting
parts/Pj~cesdefiX~ltil>~
Les pieces servant a la fixation du lecteur sont illustrees ci-dessous.
@ x2
@
~X4
©
®?'X4
X4
Suspen~~~$J,)~b~,~lv~rf'~ITI~heparcelst(.
FixationduleetluJI'$Q(l$l.iplagearriere au·move,
Putmarks.
Marquez ces emplacements.
I
PI age arriere
•Use, the hol¢SiildiciltedWith~tr~\tY~:::
. .'
Percez les trousindiques piules f1e.c~e$.
2
<P
6.5 -7 mm
3
Mounting anglel
Angle de montage
Use any angle in this range (up to
90 degrees).
Tout angle compris entre 0 et 90 .....
degres convient.
Top
The player can· notbeinstalled
Sammet inthis direction.
v
Le lecteur ne
1 i1; lI i&illpeut pas etre installe de cette nianiere.
The angle switching dial must be set on both sides of the pt~yer
Les boutons de commutation d'angle places de chaque cote du lecteur doivent occuper les memes positions.
/
~~,~
;~~:.::;tQl'
?
5 steps
5 positions
Angle switching dial adjustment
Set the dial so that its slot is closest to the horizontal direction with respect to the ground surface.
Positionnement du selecteur d'angle de montage
Positionnez Ie selecteur de maniere que la fente soit horizontale.
Pressing the clear button/Touche d'initialisation
If the power does not switch on or if the compact disc player does not operate when the button on the multi-CD controller is pressed, or if the multi-CD controller display is incorrect, press this button on the player with the tip of a pencil to restore normal operation. (This button is located inside the dooL) Always press the clear button on
the multi-CD controller, too, after pressing this button.
• If the clear button is pressed when the player contains a magazine or the ignition switch is set to the ON or ACC position, the CD title display and ITS memory are cleared.
Clear b1l1ton
Touche d'initialisation
Bag for keeping transportation screws
The transportation screws removed during installation will need to be reinstalled
if
you transport the unit later, so keep the screws in this bag.
(DEALERS: Put the removed screws in this bag and give the bag to the customer.)
Etui pour conserver les vis pour
Ie transport
Les vis pour Ie transport deposees durant
Ie montage devront etre reinstallees si vous desirez transporter I'unite
a
une date ulterieure.
Nous vous recommandons par consequent de conserver cas vis danscet etuL
(A LATTENTION DES FOURNISSEURS:
Placez las vis deposees dans cet etui at presentez celui-ci aux cliects)
<CRP1090-AlN>
A
