Panasonic Workio DP-7000 Grayscale Copier

Using the Auditron Feature

Defining Automatic Display of the Password Entry Screen

The factory default is 2 minutes.

This section explains the procedures for defining the time required for the machine to return to the Password Entry screen after a copy job is completed.

Procedure

Press Settings/Meter Check.

The screen on the right has the

Auditron Mode enabled.

Press Settings/Meter Check.

If you made a mistake while entering the Access Number, press the Clear

C button to clear and re-enter.

9-8: Changing the Auditron Access

Number

for information on how to change the Access Number.

Enter the Access Number of the Auditron Administrator and select Confirm.

Each input digit is represented by an asterisk.

9

9-7 Defining Automatic Display of the Password Entry Screen 231

Using the Auditron Feature

Review CE Data is used only by

Panasonic Service Representative.

Select Auditron Setup.

Select Set Timer for Password Entry Screen Timer.

Select Disable if you want to disable the Password Entry screen feature.

When the time displayed exceeds

59 seconds, it will be changed to

minute.

Specify a time between 1-59 seconds or 1-10 minutes in 1 second/minute increments by using the buttons.

9

The default screen is displayed if

Auditron Mode is not enabled.

Select Save, and then Close.

Select Exit Auditron.

The Password Entry screen is displayed.

232

9-7 Defining Automatic Display of the Password Entry Screen