Intercom Features. Panasonic BB-GT1540E

Add to My manuals
112 Pages

advertisement

Intercom Features. Panasonic BB-GT1540E | Manualzz

GT15xxE.book Page 69 Wednesday, August 1, 2007 11:59 AM

Intercom features between handsets

Intercom calls

Intercom calls can be made between handsets.

Note:

L

If you receive an outside call while talking on the intercom, the interrupt tone sounds. To answer the call, press

{

TEL} or {IP}. To turn the interrupt

tone off, see page 51.

L

When paging, the paged handset beeps for 1 minute.

Intercom Features

1

During an outside call, press {INT} to put the call on hold.

2

To page a handset, enter its extension number ({1} – {6}).

3

Wait for the paged party to answer.

L

If the paged party does not answer, press {TEL} or {IP} to return to the outside call.

4

To complete the transfer:

Press {i}.

L

The outside call is being routed to the handset.

To make a conference call:

Press w.

L

To leave the conference, press

{i}

. The other 2 parties can continue the conversation.

L

To put the outside call on hold, press {a}. To resume the conference, press w.

Making an intercom call

1

{

INT}

2

To page a handset, enter its extension number ({1} – {6}).

L

To stop paging, press {i}.

3

When you finish talking, press {i}.

Answering an intercom call

1

Press ] to answer the page.

2

When you finish talking, press {i}.

Note:

L

The ringer volume for intercom calls follows the higher volume level of the

2 lines (page 52).

L

When the ringer volume is set to off for both lines, the handset rings at a low level for intercom calls.

Answering a transferred call

Press ] to answer the page.

L

After the paging party disconnects, you can talk to the outside caller.

Auto intercom/Room monitor

This feature allows you to:

– answer an intercom call without pressing any buttons on the handset.

– listen to the sound in a room where the handset is located.

Transferring calls, conference calls

Outside calls can be transferred between 2 handsets. 2 handsets can have a conference call with an outside party.

Turning auto intercom on/off

“Off” (Default): Turns this feature off.

“On (Ringer On)”: When an intercom call is received, the handset rings 2 times then the speakerphone is automatically turned on.

“On (Ringer Off)”: When an intercom call is received, the handset does not ring and the speakerphone is automatically turned on. This allows you to easily monitor a baby’s room, for

For product assistance, visit www.globarange.com

For A assistance, visit www.joip.com

69

GT15xxE.book Page 70 Wednesday, August 1, 2007 11:59 AM

Intercom Features

example, from different areas of the house.

1

K

i {#}{2}{7}{3}

2

{V}

/{^}: Select the desired setting.

3

M

i {i}

Note:

L

Auto intercom cannot be used when:

– your handset is receiving a transferred outside call.

– all handsets are being paged by the base unit.

Answering an intercom call using auto intercom

1

When you are paged by another handset, speak into the microphone.

L

To switch to the receiver, press

{s}

.

2

To end the intercom, press {i}.

Monitoring audio in a room

You can listen to the sound in a room where another handset is located.

Important:

L

Before using this feature, set auto intercom on the destination handset to

“On (Ringer Off)” to allow access by other handsets.

1

Call the destination handset (page

69).

L

You can listen to the audio.

2

To mute your sound output, press

1

if necessary.

3

Press {i} to stop monitoring.

Intercom features between the handset and base unit

Available model:

BB-GT1520/BB-GT1522/BB-GT1540

Intercom calls

Intercom calls can be made between the handset and base unit.

Note:

L

If you receive an outside call while talking on the intercom, the interrupt tone sounds. To answer the call:

– press {TEL} or {IP} on the handset.

– press {TEL} or {IP} on the base unit. (BB-GT1540)

To turn the interrupt tone off, see page

51.

L

When paging unit(s) for an intercom call, the paged unit(s) beeps for 1 minute.

Making an intercom call

Handset

1

{

INT}

2

To page the base unit, press {0}.

L

To stop paging, press {i}.

3

When you finish talking, press {i}.

Base unit

BB-GT1520/BB-GT1522

1

{x}

L

All handsets beep for 1 minute.

L

To stop paging, press {x}.

2

When you finish talking, press {x}.

70

For product assistance, visit www.globarange.com

For A assistance, visit www.joip.com

GT15xxE.book Page 71 Wednesday, August 1, 2007 11:59 AM

Note:

L

You can locate a misplaced handset by paging it.

BB-GT1540

1

{x}

2

To page a specific handset, enter its extension number ({1} – {6}).

To page all handsets, press {0} or wait for a few seconds.

L

The paged handset(s) beeps for 1 minute.

L

To stop paging, press {x}.

3

When you finish talking, press {x}.

Note:

L

You can locate a misplaced handset by paging it.

Answering an intercom call

Handset

1

Press ] to answer the page.

2

When you finish talking, press {i}.

Base unit

1

Press {x} to answer the page.

2

When you finish talking, press {x}.

Note for handset and base unit:

L

The ringer volume for intercom calls follows the higher volume level of the

2 lines (page 52, 59).

L

When the ringer volume is set to off for both lines, the handset or base unit rings at a low level for intercom calls.

Answering an intercom call using auto intercom

Before using the auto intercom, turn auto

intercom on (page 69).

Handset

1

When you are paged by the base unit, speak into the microphone.

Intercom Features

L

To switch to the receiver, press

{s}

.

2

To end the intercom, press {i}.

Monitoring audio in a room using auto intercom (BB-GT1540)

Base unit

You can listen to the sound in a room where the handset is located using the

auto intercom (page 69).

Important:

L

Before using this feature, set auto intercom on the destination handset to

“On (Ringer Off)” to allow access

by the base unit (page 69).

1

Call the destination handset (page

71).

L

You can listen to the audio.

2

To mute your sound output, press

{T}

if necessary.

3

Press {x} to stop monitoring.

Transferring calls, conference calls (BB-GT1540)

Outside calls can be transferred between the handset and base unit. The handset and base unit can have a conference call with an outside party.

Handset

1

During an outside call, press {INT} to put the call on hold.

2

To page the base unit, press {0}.

3

Wait for the paged party to answer.

L

If the paged party does not answer, press {TEL} or {IP} to return to the outside call.

4

To complete the transfer:

Press {i}.

L

The outside call is being routed to the base unit.

For product assistance, visit www.globarange.com

For A assistance, visit www.joip.com

71

GT15xxE.book Page 72 Wednesday, August 1, 2007 11:59 AM

Intercom Features

To make a conference call:

Press w.

L

To leave the conference, press

{i}

. The other 2 parties can continue the conversation.

L

To put the outside call on hold, press {a}. To resume the conference, press w.

Base unit

1

During an outside call, press {x} to put the call on hold.

2

To page a specific handset, enter its extension number ({1} – {6}).

To page all handsets, press {0} or wait for a few seconds.

L

Even if you call all handsets, only the handset user who answers first can take the transferred call.

3

Wait for the paged party to answer.

L

If the paged party does not answer, press {x} to return to the outside call.

4

To complete the transfer:

Press {s}.

L

The outside call is being routed to the handset.

To make a conference call:

Press {5}.

L

To leave the conference, press

{s}

. The other 2 parties can continue the conversation.

L

To put the outside call on hold, press {a}. To resume the conference, press {5}.

Note for handset and base unit:

L

After the paging party disconnects, you can talk to the outside caller.

Answering a transferred call

Handset

Press ] to answer the page.

Base unit

Press {s} to answer the page.

72

For product assistance, visit www.globarange.com

For A assistance, visit www.joip.com

advertisement

Related manuals

advertisement

Table of contents