Time and Date
Select Time and Date in the Configuration Parameters Menu and the following screen will appear:
CONFIGURE TIME & DATE
It is impo rtant that the correct time and date are loaded ensuring
Current Time 10 :40 the correct function of the machine.
C urrent Date
14.02.2009
EDIT
TIME
EDIT
DATE
ACCEPT
EXIT
For setting the Clock press EDIT T IME:
CONFIGURE TIME & DATE
The screen to the left will appear with ‘Current Time’ flashing.
Modify Parameter:
Current Time
The first digit of the time will have a
^
symbol beneath it and the value will flash on and off. Modify each Digit with the up or down arrow keys, confirm the sections by pressing SELECT and continue
V alue:
10:45 to change each of the segments in turn. On completion press
^
ACCEPT.
Press EXIT to exit without storing the modified values.
Accept SELECT EXIT
The screen will change to display the first screen to allow the cha nging of the date.
F or setting the Date press EDIT DATE:
CONFIGURE TIME & DATE
The screen to the left will appear with ‘Current Date’ flashin g.
Modify Parameter:
C urrent Date
The first digit of the date will have a
^
symbol beneath it and the value will flash on and of f. Modify Digit with the up or down arrow keys, confirm the sections by pressing SELECT and continue to
Valu e:
14.02.20
09 c hange each of the segments in turn. On completion press
^
ACCEPT.
Press EXIT to exit with out storing the modified values.
Accept SELECT EXIT
T he screen will change to display the first screen press EXIT to return to the Co nfiguration Parameters Menu.
Programs
First select Pro grams in the Configuration Parameters Menu and the following screen will appear:
CONFIGURE PROGRAMS
Program 1
Program 2
Program 3
If the program is ‘On’ then all parameters are then governed by th eir own individual parameters. If the program is ‘Off’ only the program name and prog ram active screen will be visible.
Program 4
Program 5
Program 6
It is important to note that only program 4 is
Program 7
switched ON all other programs are switched OFF.
Prog ram 8
Prog ram 9
Select Exit
Select from the listing usin g the Arrow Keys an d then press SELECT,
Program 4
The screen will change and display the selected program.
It is important to ensure th at program 4 is ON and all other
Program A ctive
programs are switched OFF.
Yes
Modify?
To modify the program press YES
5
The screen will change and display the following.
Access Level
Enter Code for Lev el L3
0000
^
To modify the program it is necessary to enter the a ccess code for le vel 3. The screen will display 0000 with a
^
be neath the first
0
.
Use the up arrow to change the level code to 1122.
Press the up arrow once to change the 0 to 1 and then press sele ct t o move to the next 0. Continue until 1122 is on the display and th en press Confirm
Exit Select Confirm
The screen will ch ange and displ ay the following .
Program 4
Modify Parameter :
Program Acti ve
Value : yes
Program Active and yes will flash on and off to proceed pres s
CONFIRM
The screen will change and display the following screen
CONFIRM CANCEL
CONFIGURE Program
4
This menu allows for the particular program to be giv en a name and the parameters to be adjusted within the d efault parameters.
CONFIGURE Program 4
Program Name
F
S
R
P
M ast Chill Parameters torage ecove
Parameters ry Parameters rove Parameters in. Prove Time
Oven Contact
Param.
Select Exit
P rogram Nam e
The pre-defined name of the program can be changed if required
Configure Program 4
Select Program Name in Program Configuration 4 and the s creen to the left will be displayed.
Program Name
The Name is now displayed in the Start Menu.
To insert a short description for the Operation Mode into the
Program Name e.g. “Ret&Prv Bread”, select EDIT and the first letter will have a symbol
^
under it. Use the up or down arrow to s croll through the alphabet, press SELECT to confirm the change
EDIT
Accept
Exit and the symbol will move to the next letter. On completion pre ss
ACCEPT to store the changes made and the screen will re back to the first screen.
Press EXIT to return to the menu an d EXIT again to return to the Configure Program 4 menu. vert
Fast Chill Parameters
S elect Fast chill from the Configure Program 4 menu, press SELECT and the screen below will appear.
Configure Program 4
S elect YES, the screen will change with Fast Chill Active and yes
Fast Chill A ctive
Yes
M odify
flashing on and off, to proceed press CONFIRM.
To return to the menu press CANCEL.
YES EXIT NO
6
