9.6 Warranty. Ohio Medical Push-To-Set Continuous Vacuum Regulator
Below you will find brief information for Vacuum Regulator Push-To-Set Continuous Vacuum Regulator. The Push-To-Set Continuous Vacuum Regulator is a lightweight, compact unit used throughout the hospital primarily for pharyngeal/tracheal suctioning (airway management). Various models provide regulated or full-line vacuum for hospital suction procedures.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
9/Maintenance
9.6 Warranty
This Product is sold by Ohio Medical under the warranties set forth in the following paragraphs. Such warranties are extended only with respect to the purchase of this Product directly from Ohio Medical or Ohio Medical’s
9.7 Installation Procedure for Adapters/Probes
and Fittings
CAUTION: Do not use any 4 Loctite® products to seal the threads (or product which contain Methacrylate
Ester as an active ingredient).
Authorized Dealers as new merchandise and are extended to the fi rst Buyer thereof, other than for purpose of resale.
For a period of One hundred and twenty (120) months from the date of original delivery to Buyer or to Buyer’s order, but in no event for a period of more than two years from the date of original delivery by Ohio Medical to an Ohio Medical
Authorized Dealer, this Product, other than its expendable parts, is warranted to be free from functional defects in materials and workmanship and to conform to the description of the Product contained in this operation manual and accompanying labels and/or inserts, provided that the same is properly operated under conditions of normal use, that regular periodic maintenance and service is performed and that replacements and repairs are made in accordance with the instructions provided. This same warranty is made for a period of thirty (30) days with respect to the expendable parts.
The foregoing warranties shall not apply if the Product has been repaired other than by Ohio Medical or in accordance with written instructions provided by Ohio Medical, or altered by anyone other than Ohio Medical, or if the Product has been subject to abuse, misuse, negligence, or accident.
All adapters/probes and fi ttings should be installed properly to prevent leaks and to support the equipment when mounted.
Both vacuum regulator ports are 1/8-27 NPT tapered pipe threads. It is important to note that adapters/probes and fi ttings seal on the thread and may have threads exposed after they have been tightened properly.
Prior to installing the adapter/probe or fi tting, wrap the thread with PTFE tape or apply Dow® 111, 3 Ball Vac-Kote
(37951M) or equivalent.
The torque range for installing adapters/probes and fi ttings is 4.0 ft-lb (5.4 N-m) minimum to 10.0 ft-lb (13.6 N-m) maximum. Adapters/probes and fi ttings which are not keyed for specifi c orientation, should be torqued to approximately
6.0 ft-lb (8.1 N-m).
Adapters/probes and fi ttings that are keyed to specifi c orientation, must be torqued initially to 4.0 ft-lbs (5.4 N-m).
Additional torque is applied only until orientation is correct.
Ohio Medical’s sole and exclusive obligation and Buyer’s sole and exclusive remedy under the above warranties is limited to repairing or replacing, free of charge, at Ohio Medical’s option, a Product, which is telephonically reported to the nearest Ohio Medical Regional Service Offi ce and which, if so advised by Ohio Medical, is thereafter returned with a statement of the observed defi ciency, not later than seven
(7) days after the expiration date of the applicable warranty, to the designated Ohio Medical Service Offi ce during normal business hours, transportation charges prepaid, and which, upon Ohio Medical’s examination, is found not to conform with the above warranties. Ohio Medical shall not be otherwise liable for any damages including but not limited to incidental damages, consequential damages, or special damages.
-
3 Ball Vac-Kote is a registered trademark of the Ball Aerospace Systems Division.
4
Loctite is a registered trademark of Loctite Corporation.
There are no express or implied warranties which extend beyond the warranties hereinabove set forth. Ohio Medical makes no warranty of merchantability or fi tness for a particular purpose with respect to the product or parts thereof.
19 8700-0006-000 Rev.3
advertisement
Key Features
- Lightweight and compact
- Provides regulated or full-line vacuum
- Includes vacuum gauge
- Features positive pressure safety relief valve
- Low models have vacuum relief valve to limit maximum suction
- Operates in regulated or non-regulated mode
- Automatically adjusts suction level
- Easy to use and adjust
- Safe and reliable
Frequently Answers and Questions
What is the purpose of the Push-To-Set Continuous Vacuum Regulator?
How do I set the suction level on the Push-To-Set Continuous Vacuum Regulator?
What is the difference between the regulated and non-regulated modes on the Push-To-Set Continuous Vacuum Regulator?
How do I clean the Push-To-Set Continuous Vacuum Regulator?
How do I sterilize the Push-To-Set Continuous Vacuum Regulator?
Related manuals
advertisement
Table of contents
- 4 1.1 Defi nitions
- 5 1.2 Warnings
- 5 1.3 Cautions
- 5 2.1 North American Vacuum Regulators
- 5 2.2 International Vacuum Regulators
- 6 3.1 Description
- 7 3.2 Specifi cations
- 8 4.1 Equipment Set-up
- 8 4.2 Attaching the Safety Trap
- 9 4.3 Mode Selection
- 9 4.4 Setting the Suction Level
- 9 4.5 Pre-Use Checkout Procedure
- 11 4.6 Patient Set-up
- 12 5.1 Cleaning
- 12 5.1.1 Routine Exterior Cleaning
- 12 5.1.2 Internal Component Cleaning
- 12 5.1.3 Cold Flush Procedures
- 12 5.1.4 Disinfecting
- 12 5.2 Sterilization
- 14 6/Troubleshooting
- 16 7.1 Service Tools and Equipment
- 16 7.2 Continuous Vacuum Regulators (All Models)
- 16 7.2.1 Disassembly
- 16 7.2.2 Assembly
- 17 7.3 Suction Level Limit Setting - Low Models ONLY
- 17 7.3.1 Low Vacuum Limiting Screws
- 17 7.3.2 Vacuum Relief Valve Adjustment
- 17 7.4 Regulator Module
- 17 7.4.1 Disassembly
- 17 7.4.2 Assembly
- 18 7.5 Digital gauge
- 18 7.5.1 Removal of batteries
- 18 7.5.2 Inserting Batteries
- 19 8.2 Flow Test
- 19 8.3 Gauge Test
- 19 8.3.1 High Vacuum Gauges ONLY
- 19 Gauges ONLY
- 19 8.4 Regulation Test
- 19 8.5 Low Vacuum Regulators ONLY
- 19 8.6 Bleed Test
- 19 8.7 Leak Test - Supply Side
- 19 8.8 Leak Test - Patient Side
- 20 9.1 General Maintenance of Suction Equipment
- 20 9.2 Recommended Maintenance Schedule
- 20 9.2.1 Maintenance Schedule
- 21 9.3 Repair Policy
- 21 9.4 Technical Assistance
- 21 9.5 Return Instructions
- 22 9.6 Warranty
- 22 and Fittings
- 23 10.1 Illustrated Parts
- 23 10.2 Service Kits
- 23 10.3 Fittings and Adapters
- 23 10.4 North American
- 23 10.4.1 Regulator Options
- 23 10.4.2 Other Options
- 23 10.5 International
- 23 10.5.1 Regulator Options
- 23 10.5.2 Other Options