10.1 Illustrated Parts. Ohio Medical Push-To-Set Continuous Vacuum Regulator
Below you will find brief information for Vacuum Regulator Push-To-Set Continuous Vacuum Regulator. The Push-To-Set Continuous Vacuum Regulator is a lightweight, compact unit used throughout the hospital primarily for pharyngeal/tracheal suctioning (airway management). Various models provide regulated or full-line vacuum for hospital suction procedures.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
10.1 Illustrated Parts
10/Ordering Information
Item
6
7
8
9
10
1
2
3
4
5
11
12
13
14
Part Number
6700-0078-400
8700-0017-500
See Table
8700-0041-500
8700-0021-500
See table below
8700-0038-500
8700-0015-500
6700-0175-500
8700-0002-700
8700-0043-500
8700-0001-700
0210-0525-300
8700-0040-500
Description
Screw, PHH PNH, 4-20 Plastite
Knob
Case, Regulator
Gauge Lens
Drive Gear, Occlude-To-Set
Gauge, Vacuum
Cover Strip, Switch
Actuator, Occlude-To-Set
O-Ring, 2-013 Nitrile
OTS Assembly
Support Bracket, Actuator
Assembly, Reg Mod
O-Ring, 9.32 OD x 5.32 IS x 1/16 W
Plate, Detent
Qty
1
1
1
1
1
5
1
1
1
1
1
1
1
1
Item
20
21
22
23
24
15
16
17
18
19
25
26
27
Part Number
8700-0016-500
See table below
See table below
See table below
6700-0115-400
0206-5159-300
6700-0121-400
8700-0009-700
6700-0151-400
8700-0016-100
8700-0005-100
8700-0056-500
See table below
Description
Selector Switch, Overmolded
Plug, Pull Tab
Vacuum Relief Assembly
O-Ring, 2-014, Nitrile, Buna-N
Relief Valve, Positive Pressure
Plug, Filter
Orifi ce, Continuous Vacuum Regulator
Manifold Assembly
Screw, Self Tap, #6 Pan Head
Serial Number Label
Knob, Label
Plug
Label
Qty
1
1
1
4
1
1
1
1
1
1
1
1
1
Model #
1224
1225
1226
1227
1231
1234
1330
8700-0006-000 Rev.3
Item 3
Case, Regulator
8700-0012-500
8700-0022-500
8700-0012-500
8700-0022-500
8700-0053-500
8700-0053-500
8700-0022-500
Item 16
Plug, Pull Tab
8700-0039-500
8700-0039-500
8700-0039-500
N/A
N/A
N/A
8700-0039-500
Item 6
Vacuum Gauge, Analog
Range
0-200 mmHg
0-760 mmHg
0-160 mmHg
P/N
8700-0002-400
8700-0022-400
8700-0024-400
Item 17
Vacuum Relief Assembly
N/A
N/A
N/A
6700-0045-700
6700-0045-700
6700-0045-700
N/A
Item 18 O-Ring, 2-014,
Nitrille, Buna-N
N/A/
N/A
N/A
6700-0135-500
6700-0135-500
6700-0135-500
N/A/
Item 27
Label
N/A
N/A
N/A
8700-0036-101
8700-0036-102
N/A
N/A
Range
0-160 mmHg
0-200 mmHg
0-650 mmHg
Item 6
Vacuum Gauge, Digital
Replacement Battery
P/N
VR-DGP-160MM
VR-DGP-200MM
VR-DGP-760MM
VR-DGP-BAT
20
North America
United States
Customer Service and Distribution Center
Technical Suopport
Sales and Services
Equipment Service Center
Ohio Medical Corporation
1111 Lakeside Drive
Gurnee, IL 60031-4099, USA
Tollfree: 866-549-6446
Phone: 847-855-0800
Fax: 847-655-6218 www.ohiomedical.com
1111 Lakeside Drive
Gurnee, IL 60031-4099, USA
Tollfree: 866-549-6446
Phone: 847-855-0800
Fax: 847-655-6218 www.ohiomedical.com
21
8700-0006-000 (Rev.3)
01/2009
8700-0006-000 Rev.3
advertisement
Key Features
- Lightweight and compact
- Provides regulated or full-line vacuum
- Includes vacuum gauge
- Features positive pressure safety relief valve
- Low models have vacuum relief valve to limit maximum suction
- Operates in regulated or non-regulated mode
- Automatically adjusts suction level
- Easy to use and adjust
- Safe and reliable
Frequently Answers and Questions
What is the purpose of the Push-To-Set Continuous Vacuum Regulator?
How do I set the suction level on the Push-To-Set Continuous Vacuum Regulator?
What is the difference between the regulated and non-regulated modes on the Push-To-Set Continuous Vacuum Regulator?
How do I clean the Push-To-Set Continuous Vacuum Regulator?
How do I sterilize the Push-To-Set Continuous Vacuum Regulator?
Related manuals
advertisement
Table of contents
- 4 1.1 Defi nitions
- 5 1.2 Warnings
- 5 1.3 Cautions
- 5 2.1 North American Vacuum Regulators
- 5 2.2 International Vacuum Regulators
- 6 3.1 Description
- 7 3.2 Specifi cations
- 8 4.1 Equipment Set-up
- 8 4.2 Attaching the Safety Trap
- 9 4.3 Mode Selection
- 9 4.4 Setting the Suction Level
- 9 4.5 Pre-Use Checkout Procedure
- 11 4.6 Patient Set-up
- 12 5.1 Cleaning
- 12 5.1.1 Routine Exterior Cleaning
- 12 5.1.2 Internal Component Cleaning
- 12 5.1.3 Cold Flush Procedures
- 12 5.1.4 Disinfecting
- 12 5.2 Sterilization
- 14 6/Troubleshooting
- 16 7.1 Service Tools and Equipment
- 16 7.2 Continuous Vacuum Regulators (All Models)
- 16 7.2.1 Disassembly
- 16 7.2.2 Assembly
- 17 7.3 Suction Level Limit Setting - Low Models ONLY
- 17 7.3.1 Low Vacuum Limiting Screws
- 17 7.3.2 Vacuum Relief Valve Adjustment
- 17 7.4 Regulator Module
- 17 7.4.1 Disassembly
- 17 7.4.2 Assembly
- 18 7.5 Digital gauge
- 18 7.5.1 Removal of batteries
- 18 7.5.2 Inserting Batteries
- 19 8.2 Flow Test
- 19 8.3 Gauge Test
- 19 8.3.1 High Vacuum Gauges ONLY
- 19 Gauges ONLY
- 19 8.4 Regulation Test
- 19 8.5 Low Vacuum Regulators ONLY
- 19 8.6 Bleed Test
- 19 8.7 Leak Test - Supply Side
- 19 8.8 Leak Test - Patient Side
- 20 9.1 General Maintenance of Suction Equipment
- 20 9.2 Recommended Maintenance Schedule
- 20 9.2.1 Maintenance Schedule
- 21 9.3 Repair Policy
- 21 9.4 Technical Assistance
- 21 9.5 Return Instructions
- 22 9.6 Warranty
- 22 and Fittings
- 23 10.1 Illustrated Parts
- 23 10.2 Service Kits
- 23 10.3 Fittings and Adapters
- 23 10.4 North American
- 23 10.4.1 Regulator Options
- 23 10.4.2 Other Options
- 23 10.5 International
- 23 10.5.1 Regulator Options
- 23 10.5.2 Other Options