advertisement
16. TECHNICAL SPECIFICATIONS
ANALOG ΙNPUTS (individually selectable)
4, 12-bit each. Input range: see table. Input impedance 10ΜΩ.
Amplification option on A3 and A4: resistor-set gain 2 to 1000.
Resolution (SLOPE, OFFSET): 1.22mV.
VANE resolution: 1.4 degrees.
Temperature resolution (PT100): 0.3
C.
Maximum continuous voltage input: 20V
Current measurement option on A3 and A4 (w/Gain=12.5): Accuracy ( 0.2%) +
( 20μΑ). Input impedance 20Ω.
Maximum continuous current input: 100mA
Accuracy referred to input
A4
(
INP
Range: 0~+5V
A1
( 0.1% Rdng)+
( 4mV)
A2
( 0.1% Rdng)+
( 4mV)
A3
( 0.1% Rdng)+
( 4mV)
0.1% Rdng)+
( 4mV)
SLOPE, OFFSET
GAIN (2~1000)
Range:0~+5V/Gain
-
-
( 0.15% Rdng)+
( 4mV/Gain)+
( 300μV)
( 0.15% Rdng)+
( 4mV/Gain)+
( 300μV)
PT100 VANE
BAT
Range: Supply
INP
Voltage
+0V, -0.6V 0.6
C
GAIN INP GAIN
-
1.4 deg
-
-
0.6
C
- -
-
0.6
C
-
1.4 deg
1.4 deg
-
-
0.6
C
COUNTER ΙNPUTS (individually selectable)
3, 16-bit each.
Resolution: 1 count. Accuracy: 1 count.
Input range: 0~5kHz.
Input impedance: 1ΜΩ. Sensitivity: 200mVp-p or better.
Maximum continuous voltage input: 20V
-
1.4 deg
-
OUTPUTS (SENSOR SUPPLY)
3, pulsed 5V. Maximum total output current: 25mA. Accuracy 0.2%.
2, fixed 5V. Maximum total output current: 10mA. Accuracy 5%.
Optional: pulsed +12/+18V (current-loop sensor supply). Maximum output current:
20mA. Accuracy 10%. Requires the addition of an integrated circuit and the setting of certain jumpers.
Maximum continuous time, short-circuit to Ground: indefinite.
PROTECTION
All inputs/outputs, with spark gap arrestors and high-speed diodes.
SENSOR EXAMPLES
Anemometers, vanes, pyranometers, thermometers, rain level, water level and speed, barometric pressure, pulse counting, voltage, frequency, etc.
DATA STORAGE
INTERNAL BUFFER: 512Kbyte). Typical capacity (1 analog and 1 counting input, 10 min averaging): 212 days.
Compact Flash MEMORY CARDS: up to 2Gbytes, FAT16 formatted.
26
STYLITIS -41 USER'S MANUAL
DATA PROCESSING
Individually programmable slope and offset for each input. Sampling @ 1 Hz.
Calculation and storage of Minimum, Maximum, Average and Standard Deviation selectable @ 1, 2, 5, 10, 15 or 60 minute intervals.
Real Time Clock with automatic lap year correction. Accuracy: 1 minute/ month.
SERIAL PORT
PROGRAMMING AND DATA TRANSFER: RS232C port. 9600 baud, 8 bits, no parity, 1 stop bit. Socket is DB9M.
POWER SUPPLY
INTERNAL BATTERY: 2x9V alkaline- typical life 2 months (Math mode, 10-min intervals).
EXTERNAL: 6~15V, DC/AC typical consumption 500μΑ (LCD off) or 35mA (LCD on).
Power consumption doubles when the +12/18V output is activated.
Maximum continuous power supply voltage: 18V
OPTIONAL: PV panel and internal rechargeable battery.
VARIOUS
ENCLOSURE: ΙΡ65 sealed.
DIM: 31x21.5x17.5cm
WEIGHT: 4kg.
CONNECTORS: Removable screw terminal strips on bottom.
OPERATING/STORAGE TEMPERATURE: -30 C~ +70 C
LCD OPERATING TEMPERATURE: 0-50 C
WARRANTY: 1 Year.
STYLITIS -41 USER'S MANUAL
27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 1. INTRODUCTION
- 10 2. USE & SAFETY
- 11 3. USER INTERFACE & FUNCTIONS SUMMARY
- 13 4. POWER MANAGEMENT
- 14 5. MEASUREMENTS
- 14 6. OUTPUTS
- 15 7. INPUTS
- 18 8. MATH PROCESSING
- 19 9. DATA STORAGE/RETRIEVAL
- 21 10. RECORDING & FILING SYSTEM
- 22 11. DATA POST PROCESSING
- 23 12. DATA SAFETY
- 24 13. PASSWORD
- 25 14. COMMUNICATION VIA THE SERIAL PORT
- 25 15. SOFTWARE INSTALLATION
- 26 16. TECHNICAL SPECIFICATIONS
- 28 CONNECTION EXAMPLES
- 29 STYLITIS-41 MENU TREE
- 30 STYLITIS-41 DATA RECORDING
- 31 STYLITIS-41 GSM MODEM