J-Link RDI User Guide

J-Link RDI User Guide

Chapter 7

Device specifics

59

This chapter gives some additional information about specific devices.

J-Link RDI(UM08004) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG

60 CHAPTER 7 Device specifics

7.1

Analog Devices

J-Link RDI flash programming supports the Analog Devices ADuC7xxx core family.

7.1.1

ADuC7xxx

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

J-Link RDI(UM08004) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG

61

7.2

ATMEL

J-Link RDI flash programming supports the ATMEL AT91SAM7 core family.

7.2.1

AT91SAM7

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

J-Link RDI(UM08004) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG

62 CHAPTER 7 Device specifics

7.3

NXP

J-Link RDI flash programming supports the NXP LPC core family.

7.3.1

LPC2xxx

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Moreover J-Link RDI includes a device-based license for NXP LPC21xx-LPC24xx devices which includes a free license for RDI, flash download and flash breakpoints.

For more information about the device-based license and how to enable it, please

refer to chapter Device-based license on page 17.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

J-Link RDI(UM08004) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG

63

7.4

OKI

J-Link RDI flash programming supports the OKI ML67Q40x core family.

7.4.1

ML67Q40x

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

J-Link RDI(UM08004) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG

64 CHAPTER 7 Device specifics

7.5

ST Microelectronics

J-Link RDI flash programming supports the ST Microelectronics STR71x, STR73x,

STR75x and the STR91x core families.

7.5.1

STR 71x

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

7.5.2

STR 73x

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

7.5.3

STR 75x

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

7.5.4

STR91x

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

J-Link RDI(UM08004) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG

65

7.6

Texas Instruments

J-Link RDI flash programming supports the TI TMS470 core family.

7.6.1

TMS470

J-Link RDI includes "ready-to-use" projects for all supported devices. For a complete list of supported devices, open J-Link RDI configuration dialog and check the device

list of the Flash programming tab (refer to Setting up flash download & unlimited

flash breakpoints

on page 51 for detailed information). If you miss the support of a

particular device, do not hesitate to contact Segger.

Refer to J-Link / J-Trace User Guide for device specifics which are not related to flash programming.

J-Link RDI(UM08004) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG

66 CHAPTER 7 Device specifics

J-Link RDI(UM08004) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents