Davey AS series peristaltic pump offers precise pH monitoring and chemical dosing for swimming pools. Its user-friendly interface with a digital display allows for easy setup and adjustment of the desired pH level. The pump features automatic calibration and a built-in injection valve for accurate chemical dosing. It includes a durable peristaltic tube for long-lasting performance and a protective cap for the pH probe to ensure accurate readings.
advertisement
1. Warnings and Tips
Please read the warning notices very carefully because they provide important information regarding safety in installation, maintenance and use of the pH pump.
• Keep this manual in a safe place, so that it will always be available for further consultation
• The device complies with N° 89/336/CEE “electromagnetic compatibility” and N°73/23/CEE “ low voltage ” and also the subsequent modification N° 93/68/CEE
N.B.: This pump has been constructed in accordance with best practice.
Product life, electrical and mechanical reliability will be enhanced if it is correctly used and regularly maintained.
WARNING Any intervention or repair to the internal parts of the pump must be carried out by qualified and authorised personnel. The manufacturers decline all responsibility for the consequences of failure to respect this rule.
1.1 Proper use of the Pump
The pump should be used only for the purpose for which it has been expressly designed namely the dosing of liquids. Any different use is to be considered dangerous. The pump should not therefore be used for applications that were not allowed for in its design. In case of doubt, please refer to the details listed within this document, or contact your point of purchase or Davey Water Products for further information. The manufacturer of this product will not be liable for damage deriving from improper, erroneous or unreasonable use of the pump.
1.2 Risks
• After unpacking the pump, make sure that it is completely sound. In case of doubt, do not use the pump and contact Davey
•The packing materials (plastic bags, polystyrene, etc.) should be kept out of the reach of children: As they may constitute a potential source of danger
• Before you connect the pump make sure that the voltage ratings correspond to your particular voltage supply. You will find this value on the rating plates attached to the pump
• The electrical installation to which the pump is connected must comply with the local standards enforced in the state or country under consideration
3
advertisement
