Davey AS series peristaltic pump offers precise pH monitoring and chemical dosing for swimming pools. Its user-friendly interface with a digital display allows for easy setup and adjustment of the desired pH level. The pump features automatic calibration and a built-in injection valve for accurate chemical dosing. It includes a durable peristaltic tube for long-lasting performance and a protective cap for the pH probe to ensure accurate readings.
advertisement
Davey
®
Repair or Replacement Guarantee
In the unlikely event that this Davey product develops any malfunction within one year of the date of original purchase due to faulty materials or manufacture, Davey will at our option repair or replace it for you free of charge, subject to the conditions below.
Should you experience any difficulties with your Davey product, we suggest in the first instance that you contact the Davey Dealer from which you purchased the Davey product. Alternatively you can send a written letter to Davey at the addresses listed below. On receipt of your claim, Davey will seek to resolve your difficulties or, if the product is faulty or defective, advise you on how to have your
Davey product repaired, obtain a replacement or a refund.
Your Davey One Year Guarantee naturally does not cover normal wear or tear, replacement of product consumables (i.e. mechanical seals, bearings or capacitors), loss or damage resulting from misuse or negligent handling, improper use for which the product was not designed or advertised, failure to properly follow the provided installation and operating instructions, failure to carry out maintenance, corrosive or abrasive water or other liquid, lightning or high voltage spikes, or unauthorized persons attempting repairs. Where applicable, your Davey product must only be connected to the voltage shown on the nameplate.
Your Davey One Year Guarantee does not cover freight or any other costs incurred in making a claim.
Please retain your receipt as proof of purchase; you MUST provide evidence of the date of original purchase when claiming under the Davey One Year Guarantee.
Davey shall not be liable for any loss of profits or any consequential, indirect or special loss, damage or injury of any kind whatsoever arising directly or indirectly from Davey products. This limitation does not apply to any liability of Davey for failure to comply with a consumer guarantee applicable to your Davey product and does not affect any rights or remedies that may be available to you under
Consumer Legislation in your state, territory or country.
If in Australia, you are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Should your Davey product require repair or service after the guarantee period; contact your nearest
Davey Dealer or phone the Davey Support Centre on the numbers listed below.
For a complete list of Davey Dealers visit our website (davey.com.au) or call:
AUSTRALIA
Davey Support Centre
6 Lakeview Drive,
Scoresby, Australia 3179
Ph:
Fax:
1300 367 866
1300 369 119
Website: davey.com.au
Davey Water Products Pty Ltd
Member of the GUD Group
ABN 18 066 327 517
® Davey is a registered trade marks of Davey Water Products Pty Ltd.
© Davey Water Products Pty Ltd 2013.
NEW ZEALAND
Davey Support Centre
7 Rockridge Avenue,
Penrose, Auckland 1061
Ph: 0800 654 333
Fax: 09 527 7654
Website: daveynz.co.nz
* Installation and operating instructions are included with the product when purchased new.
They may also be found on our website.
16
P/N 402130-1
advertisement
Related manuals
advertisement
Table of contents
- 3 1. Warnings and Tips
- 3 1.1 Proper use of the Pump
- 3 1.2 Risks
- 4 1.3 Toxic and/or Dangerous Liquid Dosage
- 5 2. Pump Description
- 5 2.1 Parts Description
- 6 2.2 Buttons Description
- 7 3. Installation and Recommendation
- 7 3.1 Recommendations
- 8 3.2 Accessories Mounting
- 8 3.2.1 Bracket
- 9 3.2.2 Mounting of the Clamp
- 9 3.2.3 Mounting of Injection Valve
- 10 3.2.4 Mounting of the Probe on the Probe Holder
- 10 3.2.5 Mounting description of Tube on the Injection Valve
- 11 4. Commissioning and Operation
- 11 4.1 Calibration Procedure
- 12 4.2 Settings
- 12 4.2.1 Adjustment of the Set point
- 13 4.3 Operating Principle
- 13 5. Maintenance
- 13 5.1 Replacement of the Peristaltic Tube
- 14 5.2 Maintenance of the Electrode
- 14 5.3 Controller Winterising
- 14 5.4 Probe Winterising
- 15 6. Trouble Shooting
- 16 7. Davey Repair or Replacement Guarantee