PRECAUTIONS. Panasonic DP-3010, Workio DP-2310, Workio DP-3010, DP-2310

Add to my manuals
80 Pages

advertisement

PRECAUTIONS. Panasonic DP-3010, Workio DP-2310, Workio DP-3010, DP-2310 | Manualzz

Getting To Know Your Machine

Precautions

Laser Safety

LASER SAFETY

This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury.

CAUTION:

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

Caution Label

7

8

Getting To Know Your Machine

Precautions

Handling

■ Do not look directly at the exposure lamp when copying.

■ Do not turn the power switches Off or open the front cover/right cover during copying.

● Do not drop paper clips or other metal objects into the copier.

■ If you are not going to use the copier for long periods of time, turn OFF the Power Switch on the Left Side of the machine and wait 10 seconds then, turn OFF the Main Power Switch on the Back Side of the machine.

■ Energy Save Mode Notice

● If the energy save mode is set to Shutdown mode, the following functions will not work while the unit is in this mode.

When using the following functions, we recommend that you leave the energy save mode in the initial factory default setting (Sleep).

(See page 55)

1) Data Reception Function while Tandem/Remote Copying is being used

2) Printer Function (USB Local and Network Connections)

■ Inner Tray Notice

● Under normal operation, it is not necessary to remove this Inner

Tray. If this tray is removed, lift up the Paper Holder while reinstalling the tray to prevent damaging it.

Inner Tray Paper Holder

Toner and Paper

■ Store toner, drum and paper in cool areas with low humidity.

● Use high quality 16 - 24 lb (Sheet Bypass: 15 - 35 lb) paper.

● For optimum performance, it is recommended that only Panasonic Brand supplies are used in the copier.

● Do not unseal the toner bottle unless you are ready to use it.

● Certain types of transparency film may not be compatible and may damage your machine.

Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.

(Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)

Installation

■ The copier should not be installed in areas with the following conditions:

● Extremely high or low temperature and humidity.

Ambient conditions

Temperature: 50 – 86°F

Relative humidity: 30 – 80 %

● Where temperature and humidity can change rapidly, causing condensation.

● Direct exposure to sunlight.

● Directly in the air conditioning flow.

● In areas of high dust concentration.

● In areas of poor ventilation.

● In areas with chemical fume concentration.

● In areas with extreme vibration.

● With unstable or uneven conditions (floors, etc.).

Ventilation

■ The copier should be installed in a well-ventilated area to minimize the ozone density in the air.

For Your Safety

■ The maximum power consumption is 1.45 kW.

A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord. Please ensure the wall outlet is installed near the equipment and is easily accessible.

Caution Note: Unplug the power cord from the wall outlet before removing covers.

CAUTION

● THIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS

INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.

WARNING For USA

FCC WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

The user could lose the authority to operate this equipment if any unauthorized changes or modifications are made to this equipment.

This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations.

For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:

<http://www.eiae.org >.

9

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals