ELECTRIC STOVE


Add to My manuals
42 Pages

advertisement

ELECTRIC STOVE | Manualzz

TROUBLESHOOTING

PROBLEM

Stove does not operate.

Heater is not operating.

Excessive noise when the heater is operating.

POSSIBLE CAUSE

1. The stove is not plugged in.

2. A circuit breaker is tripped or a fuse blown.

3. Defective ON/OFF switch.

4. Loose wiring.

Power light is ON but the flame effect is not visible.

1. Incorrect operation.

2. Loose light bulb(s).

3. Burnt out light bulb(s).

1. Incorrect operation.

2. Defective heater switch.

3. Defective heater assembly.

4. Loose wiring.

5. Dirty or clogged vents.

1. Defective fan.

2. Defective heater assembly.

CORRECTIVE ACTION

1. Make sure the stove is plugged in to a standard 120-volt outlet.

2. Check additional appliances on the circuit; ideally the stove should be on a dedicated 15-amp circuit.

3. Call customer service.

4. Call customer service.

1. Refer to operating instructions.

2. Tighten light bulb(s).

3. Replace light bulb(s).

1. Refer to operating instructions.

2. Call customer service.

3. Call customer service.

4. Call customer service.

5. Unplug the unit. Clear vent area of dust and debris. Wait ten minutes, plug the unit in again and turn on the heater.

1. Call customer service.

2. Call customer service.

12

advertisement

Related manuals