4. CONTROL SYSTEM. benza 1,5", 4", 2", 1", 3"
Below you will find brief information for water pump 1", water pump 1,5", water pump 2", water pump 3", water pump 4". The user manual contains detailed information on how to use your new water pump. Get the most out of your new Benza water pump, learn about its features and functionalities.
advertisement
CONTROL SYSTEM
4. CONTROL SYSTEM
Before operating our company's water pump, carefully read and understand the owner’s manual and be familiar with each control function. Know how to operate and how to do in a urgency condition.
1) Fuel Lever
The fuel lever is used for fuel flowing from the fuel tank to carburetor.
Set the fuel lever to the “OPEN” position.
When not operating the engine, set the fuel lever to the “CLOSE” position.
FUEL LEVER
OPEN
CLOSE
2) Engine Switch
The engine switch is used for opening or closing ignition circuit :
Set the engine switch to the “OPEN” position to run the engine, and set it to the “CLOSE” position to stop the engine.
·
16 ·
CONTROL SYSTEM
ENGINE SWITCH
CLOSE
ENGINE SWITCH
OPEN
CLOSE
OPEN
3) Choke Lever
The choke lever is used for opening and closing the choke of the carburetor.
Set the choke lever to the “CLOSE” position for cold starting.
Set the choke lever to the “OPEN” position for normal operation or the
Engine's warm starting.
CHOKE LEVER
CLOSE
OPEN
·
17 ·
CONTROL SYSTEM
4) Throttle Lever
Adjust the throttle lever to change speed of the engine, thereby adjust the discharge water. For a bigger water discharge, set the throttle lever to the
HIGH position, for a smaller water discharge, set the throttle lever to the
LOW position.
THROTTLE LEVER
LOW
HIGH
5) Recoil Starter
Pull the recoil starter to start the engine.
Don’t allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter
STARTER GRIP
·
18 ·
advertisement
Key Features
- Easy to use
- Reliable
- Durable
- High performance
- Easy to maintain
- Quiet operation
