7. STARTING THE ENGINE. benza 1,5", 4", 2", 1", 3"
Below you will find brief information for water pump 1", water pump 1,5", water pump 2", water pump 3", water pump 4". The user manual contains detailed information on how to use your new water pump. Get the most out of your new Benza water pump, learn about its features and functionalities.
advertisement
STARTING THE ENGINE
7. STARTING THE ENGINE
1) Screw the priming plug off and prime the pump with water until the water is overflowing (water pump set shall be placed on a level ground).
2) Move the fuel valve lever to the “ON” position.
FUEL VALVE LEVER
FUEL COCK
OPEN
ON
3) To start a cold engine, move the choke lever to the “CLOSED” position.
CHOKE
LEVER
ON
CLOSED
·
29 ·
STARTING THE ENGINE
4) Move the throttle lever away from the “SLOW” position about 1/3 of the way toward the “FAST” position.
THROTTLE
LEVER
FAST SLOW
5) Turn the engine switch to the “ON” position.
THROTTLE LEVER
ENGINE SWITCH
ENGINE SWITCH(the
“ON” position.)
OPEN
6) Pull the starter grip lightly until resistance is felt, the pull it briskly.
Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter.
·
30 ·
STARTER GRIP
STARTING THE ENGINE
7) If the choke lever was moved to the CLOSED position to start the engine, gradually move it to the OPEN position as the engine warms up.
CHOKE LEVER CHOKE LEVER
ON
8) Setting engine speed
After starting the engine, move the throttle lever to the FAST position for self-priming, and check pump output.
Pump output is controlled by adjusting engine speed, moving the throttle lever in the FAST direction will increase pump output, and moving the throttle lever in the slow direction will decrease pump output.
·
31 ·
advertisement
Key Features
- Easy to use
- Reliable
- Durable
- High performance
- Easy to maintain
- Quiet operation
