10. STORAGE. benza 1,5", 4", 2", 1", 3"
Below you will find brief information for water pump 1", water pump 1,5", water pump 2", water pump 3", water pump 4". The user manual contains detailed information on how to use your new water pump. Get the most out of your new Benza water pump, learn about its features and functionalities.
advertisement
STORAGE
10. STORAGE
1) Remove priming plug and drain plug, flush the chamber with clean water, reinstall the priming plug and drain plug. After stopping the engine, cool for half an hour at least, then flush all outer surfaces and wipe it.
Higher pressure flushing water can enter into the air filter and muffler, even entering into the cylinder along the air path, resulting in corrosion and damage. So, operation must be performed only after stopping and cooling.
2) Remove drain plug of the carburetor and sediment cup, then open the fuel lever. Completely drain the fuel from the carburetor and fuel tank, then install the sediment cup and drain plug back and tighten them.
FUEL LEVER
O-RING
WASHER
DRAIN PLUG
SEDIMENT CUP
3) Change the engine oil.
4) Pour a tablespoon (5-10 cc) of clean engine oil into the cylinder.
Crank the engine several revolutions to distribute oil in the cylinder.
Reinstall the spark plug back.
·
39 ·
STORAGE
5) Pull the starter grip slowly until resistance is felt. During such a process, intake and exhaust valves keep closed to restrict the moisture entering into cylinder head, then, return the starter grip gently.
6) Repair damaged enamel paint, and apply a thin film of grease to the areas likely to be rusty.
7) Cover a dust-proof sleeve on the water pump and place it in the ventilated area.
·
40 ·
advertisement
Key Features
- Easy to use
- Reliable
- Durable
- High performance
- Easy to maintain
- Quiet operation
