Refer to the Instructions for Continued Airworthiness (ICA) manual 123-001-01 and Cargo Hook Service Manual 122-017-00 for maintenance.. Onboard Systems Bell 206L & 407 Keeperless
Below you will find brief information for Cargo Hook Bell 206L & 407 Keeperless. This manual will guide you on the installation and operation of this cargo hook kit, which is designed to lift and transport loads up to 3,600 pounds using a Bell 206L or 407 helicopter. The cargo hook kit comes equipped with both electrical and mechanical release mechanisms for safe and efficient load handling.
Advertisement
Advertisement
Advertisement
Key features
Keeperless design
3,600 lb. load capacity
Electrical and manual release mechanisms
Compatible with Bell 206L and 407 series helicopters
Approved for installation on specific serial numbers
Frequently asked questions
The cargo hook kit has a load capacity of 3,600 pounds (1,633 kg).
The cargo hook kit is compatible with Bell 206L and 407 series helicopters.
The cargo hook can be released through two methods: electrical release by using the push-button switch in the cockpit, or manual release with the release cable.
The cargo hook kit requires 22-32 VDC and 6.9 - 10 amps.
The cargo hook kit weighs approximately 3.56 lbs (1.61 kgs).
Related
Onboard Systems Cargo Hook Kit Owner's Manual: AI Chat & PDF Access
Onboard Systems Cargo Hook Kit Owner's Manual
Onboard Systems Cargo Hook Suspension System Owner's Manual
AS350B3 3,600 Pound Keeperless Cargo Hook Kit Owner's Manual
Onboard Systems Talon LC 3.5KK Hydraulic Cargo Hook Kit Owner's Manual
Onboard Systems Cargo Hook Kit Lama H-Frame & Lama Frame Swing Owner's Manual
Onboard Systems AS350 Series Cargo Hook Sling Suspension System Owner's Manual
Cargo Hook Swing Suspension System AS350 Series Owner's Manual
Onboard Systems AS350 Talon LC Owner's Manual
Talon LC Hydraulic Cargo Hook Kit AS350 200-281-01, AS350 200-281-02 Owner's Manual
Cargo Hook Kit BO-105 3.5KK Owner's Manual
