advertisement
Clean the pickup roller (tray 2)
1.
Unplug the power cord from the printer, and allow the printer to cool.
2.
Press the print-cartridge-door button, and then remove the print cartridge from the printer.
CAUTION
After removing the print cartridge, only handle it on the ends.
3.
Remove tray 2.
ENWW Clean the pickup roller (tray 2) 55
4.
Open the automatic two-sided path door on the front of the printer (HP LaserJet P2015d,
HP LaserJet P2015dn, and HP LaserJet P2015x printers only).
5.
Place the printer on the work surface with the front of the printer facing up.
56 Chapter 4 Maintenance ENWW
6.
Pull the white tabs outward, and rotate the tabs up.
7.
Slide the right tab to the right, and leave the tab in this position throughout the procedure.
ENWW Clean the pickup roller (tray 2) 57
8.
Slide the pickup roller assembly to the right, and remove the left end cap.
9.
Remove the pickup roller.
CAUTION
Do not touch the pickup-roller pad.
58 Chapter 4 Maintenance ENWW
10.
Dab a lint-free cloth in water, and scrub the roller.
11.
Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
12.
Allow the pickup roller to dry completely.
13.
Insert the left side of the pickup roller into the left slot (1), and insert the right side (the side that has the notches in the shaft) into the right slot (2).
ENWW Clean the pickup roller (tray 2) 59
14.
Place the end cap over the shaft on the left side, push the end cap to the right, and rotate the tab downward into position.
15.
Rotate the shaft until the notches engage and the shaft clicks into place.
16.
Push the right tab to the left, and rotate the tab downward into position.
17.
Place the printer on the work surface with the top of the printer facing up.
18.
Close the automatic two-sided path door.
60 Chapter 4 Maintenance ENWW
19.
Reinstall the print cartridge, and close the print-cartridge door.
20.
Plug the printer in.
ENWW Clean the pickup roller (tray 2) 61
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 12 Product features
- 12 HP LaserJet P2015 printer
- 12 HP LaserJet P2015d printer
- 13 HP LaserJet P2015n printer
- 13 HP LaserJet P2015dn printer
- 13 HP LaserJet P2015x printer
- 14 Identify product parts
- 16 Control panel
- 17 Supported paper and other media
- 17 Optimize print quality for media types
- 18 Guidelines for using media
- 18 HP media
- 18 Media to avoid
- 18 Media that can damage the printer
- 19 Paper
- 19 Labels
- 19 Label construction
- 19 Transparencies
- 19 Envelopes
- 20 Envelope construction
- 20 Envelopes with double-side seams
- 20 Envelopes with adhesive strips or flaps
- 20 Envelope storage
- 21 Card stock and heavy media
- 21 Card stock construction
- 21 Card stock guidelines
- 21 Letterhead and preprinted forms
- 23 Load media
- 24 Tray 2 and optional tray
- 24 Straight-through output path
- 25 Manual feed
- 25 Media type and tray loading
- 28 Site preparation
- 29 Package contents
- 30 Install tray
- 31 Install printer software
- 31 Supported operating systems
- 31 Drivers
- 31 Windows printer drivers
- 31 Macintosh printer driver
- 31 Driver downloads
- 32 Installing software on Microsoft® Windows
- 33 Installing software on Macintosh OS X V10.2.8, V10.3.9, and V
- 33 Uninstaller
- 35 Printer information pages
- 35 Demo page
- 35 Configuration page
- 35 Supplies Status page
- 35 Network Configuration page
- 38 HP ToolboxFX
- 38 To view HP ToolboxFX
- 39 Status
- 40 Alerts
- 40 Set up status alerts
- 40 Set up e-mail alerts
- 41 Device settings
- 41 Device information
- 42 Paper handling
- 42 Print quality
- 42 Paper types
- 43 System setup
- 43 Service
- 43 Print settings
- 43 Printing
- 43 PCL 5e
- 44 PostScript
- 44 Network settings
- 45 Embedded Web server
- 45 Open the embedded Web server
- 46 Status tab
- 46 Settings tab
- 46 Networking tab
- 47 Links
- 50 Replace the print cartridge
- 52 Redistribute toner
- 53 Clean the printer
- 53 Clean the print-cartridge area
- 54 Clean the printer media path
- 56 Clean the pickup roller (tray 1)
- 61 Replace the pickup roller (tray 1)
- 65 Clean the pickup roller (tray 2)
- 72 Replace the pickup roller (tray 2)
- 80 Introduction
- 81 Internal components
- 83 Timing
- 84 Engine control system
- 86 Laser/scanner system
- 87 Pickup/feed/delivery system
- 89 Image-formation system
- 94 Introduction
- 94 Removal and replacement strategy
- 94 Electrostatic discharge
- 94 Required tools
- 95 Before performing service
- 95 Pre-service procedures
- 95 Parts removal order
- 96 Covers
- 96 Left-side cover
- 96 Right-side cover
- 97 Back cover
- 99 Duplexer tray (HP LaserJet P2015d, P2015dn, and P2015x printers only)
- 100 Top cover
- 105 Control panel
- 107 Formatter
- 108 Laser/scanner
- 109 Memory-tag-reader assembly
- 111 Duplex-drive PCA (HP LaserJet P2015d, P2015dn, and P2015x printers only)
- 113 Fuser
- 114 Duplex-drive gears (HP LaserJet P2015d, P2015dn, and P2015x printers only)
- 116 Duplex solenoid (HP LaserJet P2015d, P2015dn, and P2015x printers only)
- 117 Fuser
- 128 Interlock assembly
- 136 Main motor
- 138 Pickup and feed assemblies
- 138 Transfer roller
- 139 Registration assembly
- 140 Main gear assembly/tray 2 pickup solenoid
- 144 Print-cartridge door
- 148 Basic problem solving
- 150 Status-light patterns
- 157 Fatal error secondary messages
- 160 Accessory error secondary messages
- 161 Media problemsolving
- 163 Printed page is different from what appeared on screen
- 163 Garbled, incorrect, or incomplete text
- 163 Missing graphics or text, or blank pages
- 164 Page format is different from another HP LaserJet printer
- 164 Graphics quality
- 165 Image problem solving
- 165 Light print or faded
- 165 Toner specks
- 165 Dropouts
- 166 Vertical lines
- 166 Gray background
- 166 Toner smear
- 167 Loose toner
- 167 Vertical repetitive defects
- 167 Misformed characters
- 168 Page skew
- 168 Curl or wave
- 168 Wrinkles or creases
- 169 Toner scatter outline
- 170 Clear jams
- 170 Print-cartridge area
- 172 Input trays
- 175 Output bin
- 176 Straight-through output path
- 177 Automatic two-sided printing path
- 182 Diagnostic resources
- 182 Engine test
- 182 Continuous self-test
- 183 Half self-test functional check
- 183 Drum rotation functional check
- 183 Heating element check
- 184 High-voltage contacts check
- 184 Checking the print cartridge contacts
- 185 Checking the high-voltage connector assembly
- 186 Network-setup problemsolving
- 187 Reset the printer
- 187 NVRAM initialization
- 187 Super NVRAM initialization
- 188 Network reset
- 188 Cold reset
- 189 Troubleshooting tools and reference diagrams
- 189 Repetitive image defects
- 190 General timing chart
- 191 Circuit diagram
- 193 Solenoids
- 194 Switches and sensors
- 195 Rollers and pads
- 198 Order parts and supplies
- 198 Parts
- 198 Related documentation and software
- 198 Supplies
- 200 Assembly locations
- 204 Covers
- 208 Internal assemblies
- 238 Alphabetical parts list
- 249 Numerical parts list
- 262 Consumables and accessories
- 262 10/100 networking print servers
- 263 HP print cartridges
- 263 HP policy on non-HP print cartridges
- 263 Storing print cartridges
- 263 Print cartridge life expectancy
- 263 Saving toner
- 264 DIMMs (memory or font)
- 264 Install a DIMM
- 266 Test the DIMM installation
- 266 Remove a DIMM
- 270 Hardware service
- 270 Extended warranty
- 271 Guidelines for repacking the printer
- 271 How to contact HP
- 274 Environmental specifications
- 274 Acoustic emissions
- 275 Electrical specifications
- 277 Physical specifications
- 278 Printer capacities and ratings
- 278 Memory specifications
- 278 Port availability
- 280 FCC compliance
- 281 Declaration of Conformity statements
- 282 Regulatory statements
- 282 Laser safety statement
- 282 Canadian DOC regulations
- 282 Korean EMI statement
- 283 Laser statement for Finland