advertisement
8
Safety Summary
Electrostatic Discharge (ESD)
Welch Allyn Spot Vital Signs LXi
Electrostatic discharge is a sudden current flowing from a charged object to another object or to ground. Electrostatic charges can accomulate on common items such as foam drinking cups, cellophane tape, synthetic clothing, untreated foam packaging material, and untreated plastic bags and work folders, to name only a few.
Electronic components and assemblies, if not properly protected against ESD, can be permanently damaged or destroyed when near or in contact with electrostatically charged objects. When you handle components or assemblies that are not in protective bags and you are not sure whether they are static-sensitive, assum that they are static-sensitive and handle them accordingly.
• Perform all service procedures in a static-protected environment. Always use techniques and equipment designed to protect personnel and equipment from electrostatic discharge.
• Remove static-sensitive components and assemblies from their static-shielding bags only at static-safe workstations - a properly grounded table and grounded floor mat - and only when you are wearing a grounded wrist strap (with a resistor of at least 1 megohm in series) or other grounding device.
• Use only grounded tools when inserting, adjusting, or removing static-sensitive components and assemblies.
• Remove or insert static-sensitive components and assemblies only with monitor power turned off.
• Insert and seal static-sensitive components and assemblies into their original staticshielding bags before removing them from static-protected areas.
Always test your ground strap, bench mat, conductive work surface, and ground cord before removing components and assemblies fromtheir protective bags and before beginning any disassembly or assembly procedures.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 1 - Safety Summary
- 9 Introduction
- 9 Warnings and Cautions
- 9 General Warnings
- 10 Blood Pressure Warnings
- 12 Temperature Warnings
- 13 Warnings
- 14 General Cautions
- 15 Blood Pressure Cautions
- 15 Temperature Cautions
- 15 Cautions
- 16 Electrostatic Discharge (ESD)
- 17 Symbols
- 17 Safety Symbols
- 17 Button Symbols
- 18 Connection Symbols
- 18 Agency Symbols
- 19 2 - Overview
- 19 Purpose and Scope
- 19 Other Applicable Documents
- 20 Contents Checklist
- 20 Possible Attachments
- 21 Service
- 21 Technical Assistance
- 21 Field Replacement Units
- 21 Service Loaners
- 21 Service Intervals
- 22 Spot Vital Signs LXi Configurations
- 22 Controls
- 24 Display Window
- 26 Connections
- 27 Braun ThermoScan PRO 4000 Lock
- 27 Blood Pressure Hose and Cuff
- 27 Thermometer
- 28 Sensor
- 28 Quick Reference Card
- 29 AC Power Transformer
- 29 Battery
- 29 Standby Mode
- 31 3 - Functional Overview
- 31 Self Test
- 32 Internal Configuration Mode
- 36 Functional Verification
- 36 Blood Pressure Functional Check
- 37 Temperature Functional Check
- 40 Functional Check
- 41 4 - Calibration
- 42 Connections
- 42 Voltage Calibration
- 43 Blood Pressure Calibration
- 43 Configuration Calibration
- 45 5 - Troubleshooting
- 45 Error Codes
- 47 Battery Voltage Check
- 47 Window Display Check
- 47 Blood Pressure Calibration Check
- 48 Temperature Functional Check
- 48 Functional Check
- 48 Functional Testing Procedures
- 49 Current Test
- 49 Noise Levels
- 49 Button Test
- 49 Interface Test
- 50 Pneumatic Tests
- 50 Temperature Test
- 50 Overpressure Test
- 51 Service Work Checklist
- 51 Spot Vital Signs
- 53 6 - Disassembly and Repair
- 56 Key Pad Disassembly
- 57 Circuit Board Disassembly
- 57 Masimo
- 58 Nellcor
- 59 Blood Pressure Circuit Board Disassembly
- 61 LCD Inverter Ballast Board Disassembly
- 61 LCD Disassembly
- 62 Pump Disassembly
- 62 RS232-Communication Circuit Board Disassembly
- 63 Fan and Power Circuit Board Disassembly
- 63 Thermometry Circuit Board Disassembly
- 65 SureTemp Plus
- 67 Braun ThermoScan PRO
- 69 7 - Technical Overview
- 69 System Description
- 69 Battery System
- 69 Battery Charger
- 69 “CPU I/O” Power Supply
- 69 CPU Core Power Supply
- 70 +5V Supply
- 70 Clock/Calendar Power
- 70 Mod F NIBP Power
- 70 and Thermometer Power
- 70 LCD Power
- 71 External Load (RS-232) Power
- 71 SureTemp Plus Thermometer Interface
- 71 Braun ThermoScan PRO 4000 Thermometer Interface
- 71 Description
- 72 Bar Code Scanner Description
- 73 Printer Description
- 74 Interconnect Diagram
- 75 8 - Field Replaceable Units
- 79 9 - Specifications
- 79 Performance
- 79 Blood Pressure Accuracy
- 80 Temperature Specifications
- 81 Specifications
- 81 Masimo Sensor Accuracy Guide
- 81 Masimo Patents
- 82 Nellcor Sensor Accuracy Guide
- 82 Nellcor Patents
- 83 Mechanical
- 83 Electrical
- 83 Patents
- 83 Battery
- 83 Environmental
- 84 Wireless Radio
- 84 Guidance and Manufacturer’s Declaration
- 84 Emissions and Immunity Information
- 87 10 - Maintenance and Service
- 87 Cleaning
- 87 Spot Vital Signs LXi
- 87 Blood Pressure Cuff
- 87 Blood Pressure Hose and Cable
- 87 SureTemp Plus Thermometer
- 88 Braun ThermoScan PRO 4000 Thermometer
- 88 Sensors
- 88 Printer
- 89 Battery Replacement
- 89 Spot Vital Signs LXi
- 90 Braun ThermoScan PRO
- 90 Printer
- 91 A - Repair Test Specifications
- 91 General Unit Test
- 91 A-D Noise Test
- 91 Leak Test
- 91 Inflation Test
- 91 Dump Test
- 91 Pneumatic Accuracy Test
- 92 Valve Control Test
- 92 Voltage Calibration
- 92 Blank Mode Current Test
- 92 Back Light (Idle) Current Test
- 92 Valve/Pump Mode Current Test
- 92 Interface Test
- 92 Temperature Option Requirements
- 92 Accuracy Test
- 93 Temperature Probe Test
- 93 Option Requirements
- 93 Functional Test
- 93 Mode Current Test
- 93 Fail Safe Test
- 93 Over Pressure Test
- 93 Over 15 mmHg
- 95 B - Supplies and Accessories
- 95 Blood Pressure
- 96 Temperature
- 97 Pulse Oximetry
- 97 Masimo Accessories
- 98 Nellcor Accessories
- 99 Miscellaneous
- 99 Service Contracts
- 101 C - Miscellaneous Mounting Accessories
- 101 Wall Mount Kit
- 103 Mobile Stand Kit
- 105 DPAC Mounting Accessory
- 106 Printer Mounting Accessory
- 107 Scanner Mounting Accessory
- 109 Spot LXi
- 109 Accessories