SAFETY TEST REPORT

Add to my manuals
51 Pages

advertisement

SAFETY TEST REPORT | Manualzz

19.6

20

20.1

Clause

19

19.1

19.2

19.3

19.4

19.5

20.1.2

20.1.3

EN 60065

Requirement – Test Result - Remark Verdict

N

STABILITY AND MECHANICAL HAZARDS

P

Mass of the equipment exceeding 7 kg .................: <7kg N

Apparatus intended to be fastened in place – suitable instructions

Test on a plane, inclined at 10 o

to the horizontal

N

N

100 N force applied vertically downwards N

N 100N force, or 13% of weight, applied horizontally to point of least stability

Edges or corners not hazardous

Glass surfaces with an area exceeding 0,1 m² or maximum dimension > 450 mm, pass the test of

19.5.1

Edges or corners are rounded. P

N

Wall or ceiling mountings adequate N

RESISTANCE TO FIRE

Electrical components and mechanical parts a) Exemption for components contained in an enclosure of material V-0 to IEC 60707 with openings not exceeding 1 mm in width

P

P

P Resistance to fire is achieved by a combination of engineering design, production methods and by using materials with low flammability for internal parts.

Considered. P b) Exemption for small components as defined in

20.1

P

Clause 14 or 20.1.4

Insulation of internal wiring working at voltages

> 4 Kv or leaving an internal fire enclosure, not contributing to the spread of fire

No internal wiring working at voltages> 4 KV.

N

Material of printed circuit boards on which the available power exceeds 15 W at a voltage between 50 V and 400 V (peak) a.c. or d.c. meets

V-1 or better to IEC60707, unless used in a fire enclosure

PCB with flammability class V-

0.

P

Material of printed circuit boards on which the available power exceeds 15 W at a voltage >400 V

(peak) a.c. or d.c. meets V-0 to IEC 60707

N

Safety Test Report #: SHE-1007-10462-LVD

Prepared for Shenzhen KTC Technology Co., Ltd.

Prepared by EMC Compliance Management Group. Page 19 of 48

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals