SAFETY TEST REPORT

Add to my manuals
51 Pages

advertisement

SAFETY TEST REPORT | Manualzz

Clause

ZB

2.6.1

13.3.1

15.1.1

EN 60065

Requirement – Test Result - Remark Verdict

ANNEX ZB TO EN 60065, SPECIAL NATIONAL CONDITIONS

DK: certain types of Class I apparatus, see 15.1.1, may be provided with a plug not establishing earthing continuity when inserted in Danish socketoutlets

N

N

NO: In Norway, due to IT power distribution system used, the a.c. MAINS supply voltage is considered to be equal to the line-to-line voltage, and will remain 230V in case of a single earth fault.

N

N DK: mains cord for single-phase equipment having a rated current not exceeding 10 A shall be provided with a plug according to Heavy Current

Regulations Section 107-2-D1

DK: Class I equipment with socket-outlets with earthing contact, or which are intended to be used in locations where protection against indirect contact is required shall be provided with a plug in compliance with Standard Sheet DK 2-1a

N

N DK: socket-outlets for providing power to Class II equipment with a rated current of 2,5 A shall have dimensions according to the drawing on page 131 of EN 60 065:98 other dimensions shall be to

IEC 60 083 Standard Sheet C 1a for portable socket-outlets

DK: mains socket-outlets with earthing contact shall comply with Heavy Current Regulations

Section 107-2-D1, Standard Sheet DK 1-3a,

DK 1-5a or DK 1-7a

GB: equipment fitted with a flexible cable or cord provided with a 13A BS 1363 plug as in Statutory

Instrument 1768:94

IE: equipment fitted with a flexible cable or cord provided with a 13 A plug in accordance with

Statutory Instrument 525:97

N

N

N

NO: mains socket-outlets on Class II equipment meet CEE Publication 7 with the following amendments:

- dimensions 2,5 A, 250 V socket-outlets shall comply with Standard Sheet 1 page 132 of

EN 60 065:98

- mechanical strength 2,5 A, 250 V socket-outlets tested as specified in EN 60 065, 12.1.3

---

N

N

- protecting rim also tested N

NO: method b) of 8.1 is not permitted. Double or reinforced insulation is required between parts connected to the mains and parts connected to the public telecommunications network

N

Safety Test Report #: SHE-1007-10462-LVD

Prepared for Shenzhen KTC Technology Co., Ltd.

Prepared by EMC Compliance Management Group. Page 21 of 48

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals