ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M Digital Video Recorder User Manual

ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M Digital Video Recorder User Manual
Add to My manuals

Below you will find brief information for Digital Video Recorder ADVR-0410H1M, Digital Video Recorder ADVR-0820H2M, Digital Video Recorder ADVR-1640H2M. This user manual describes how to install, configure, and operate the device, including live view, recording, playback, alarm settings, network settings, HDD management, camera settings, device management and maintenance, and other features. The manual also provides user tips and troubleshooting advice for common issues. It is recommended to read the user manual carefully before starting to use the device.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M Digital Video Recorder User Manual | Manualzz

User Manual of Digital Video Recorder

4.1 Configuring PTZ Settings

Purpose:

Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera.

Before you start:

Check that the PTZ and the device are connected properly through RS-485 interface.

Steps:

1. Enter the PTZ Settings interface.

Menu>Camera>PTZ>General

Figure 4.1 PTZ- General

2. Choose the camera for PTZ setting in the Camera dropdown list.

3. Enter the parameters of the PTZ camera.

Note:

All the parameters should be exactly the same as the PTZ camera parameters. Only PTZ Protocol can be set for network cameras.

Example: If the PTZ camera has a Baud rate as 115200, you should input 115200 in the Baud rate field.

4. Click Copy if you want to configure same settings to other PTZ cameras.

5. Click Apply button to save the settings.

4.2 Setting PTZ Presets, Patrols & Patterns

Before you start:

Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.

4.2.1 Customizing Presets

Purpose:

Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place.

Steps:

1. Enter the PTZ Control interface.

35

advertisement

Key Features

  • PAL/NTSC adaptive video inputs
  • H.264 video compression
  • Encoding at up to WD1 resolution
  • Dual-stream support per channel
  • Independent configuration for each channel
  • Motion detection alarm
  • Multiple PTZ protocols supported
  • Remote control and monitoring
  • Backup to USB, SATA, or eSATA
  • Embedded Web server

Questions & Answers

2024-11-08

F F I

Where are recordings saved?
Recordings are saved on the SATA hard disk(s). The ADVR-0410H1M supports one disk, while the ADVR-0820H2M/ADVR-1640H2M models support up to two.
What is the maximum storage capacity per hard disk?
Each hard disk can hold up to 4TB of data.
How can I access recorded files?
Recorded files can be viewed in the Playback menu. Searching is possible by channel, time, event, tag, and system log.

Frequently Answers and Questions

What are the supported models for this user manual?
This manual is applicable to the following models: ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M.
What are the key features of this digital video recorder?
This device supports PAL/NTSC adaptive video inputs, H.264 video compression, encoding at up to WD1 resolution, dual-stream per channel, independent configuration for each channel, motion detection alarm, multiple PTZ protocols, remote control and monitoring, backup to USB, SATA, or eSATA, and embedded Web server.
How do I start up and shut down the device?
To start up the device, ensure the power supply is plugged in and press the POWER button on the rear panel. To shut down the device, enter the Shutdown menu, click the Shutdown button, and then turn off the power switch on the rear panel.

Related manuals

Download PDF

advertisement

Table of contents