ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M Digital Video Recorder User Manual
Below you will find brief information for Digital Video Recorder ADVR-0410H1M, Digital Video Recorder ADVR-0820H2M, Digital Video Recorder ADVR-1640H2M. This user manual describes how to install, configure, and operate the device, including live view, recording, playback, alarm settings, network settings, HDD management, camera settings, device management and maintenance, and other features. The manual also provides user tips and troubleshooting advice for common issues. It is recommended to read the user manual carefully before starting to use the device.
advertisement
User Manual of Digital Video Recorder
Steps:
1.
Enter the Manual settings interface.
Menu> Manual
Figure 5.20 Manual Record
2.
Enable recording for camera (s).
Click the status button beside each camera number to change to , or you can enable recording for all cameras by clicking the status bar before Analog to change it to .
3.
Set recording mode to manual.
By default, the camera is enabled with recording by schedule ( ). Click the change it to and click again to enable the recording to manual ( ).
: recording by schedule.
: recording by manual operation.
Note:
After rebooting, all the manual records enabled are canceled.
4.
Start all-day normal recording or all-day motion detection recording of all channels.
1) Click for or .
status bar to
Figure 5.21 Start Normal or Motion Detection Recording
2) Click Yes to enable all-day normal recording or all-day motion detection recording of all channels.
5.5 Configuring Holiday Record
Purpose:
You may want to have different plan for recording on holiday. Follow the steps to configure the record schedule on holiday.
Steps:
1.
Enter the Record setting interface.
Menu>Record
2.
Choose Holiday on the left bar.
53
User Manual of Digital Video Recorder
Figure 5.22 Holiday Settings
3.
Enable Edit Holiday schedule.
1) Click to enter the Edit interface.
Figure 5.23 Edit Holiday Settings
2) Check the checkbox after Enable.
3) Select Mode from the dropdown list.
There are three different modes for the date format to configure holiday schedule.
4) Set the start and end date.
5) Click Apply to save settings.
6) Click OK to exit the Edit interface.
4.
Enter Record Schedule settings interface.
Menu> Record> Schedule
1) Select Record.
2) Check the checkbox after Enable Schedule.
3) Click Edit.
4) Select Holiday from the Schedule dropdown list.
54
User Manual of Digital Video Recorder
Figure 5.24 Edit Schedule- Holiday
5) Select Motion or Normal from the Type dropdown list.
6) If you need all day recording, check the All Day checkbox. Otherwise leave it blank.
7) Set start/end time for holiday schedule.
Note:
Up to 8 periods can be configured for each day. And the time periods can’t be overlapped each other.
In the time table of the channel, both holiday schedule and normal day schedule are displayed.
Repeat the above steps4)-7) to set Holiday schedule for other channel. If the holiday schedule can also be used to other channels, click Copy and choose the channel you want to apply the settings.
55
advertisement
Key Features
- PAL/NTSC adaptive video inputs
- H.264 video compression
- Encoding at up to WD1 resolution
- Dual-stream support per channel
- Independent configuration for each channel
- Motion detection alarm
- Multiple PTZ protocols supported
- Remote control and monitoring
- Backup to USB, SATA, or eSATA
- Embedded Web server
