ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M Digital Video Recorder User Manual
Below you will find brief information for Digital Video Recorder ADVR-0410H1M, Digital Video Recorder ADVR-0820H2M, Digital Video Recorder ADVR-1640H2M. This user manual describes how to install, configure, and operate the device, including live view, recording, playback, alarm settings, network settings, HDD management, camera settings, device management and maintenance, and other features. The manual also provides user tips and troubleshooting advice for common issues. It is recommended to read the user manual carefully before starting to use the device.
advertisement
User Manual of Digital Video Recorder
6.1 Playing Back Record Files
6.1.1 Playing Back by Channel
Purpose:
Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.
Instant playback by channel:
Steps:
Choose a channel in live view mode using the mouse and click the button in the quick setting toolbar.
Note: Only record files recorded during the last five minutes on this channel will be played back.
Figure 6.1 Instant Playback Interface
All-day Playback by channel
1. Enter the All-day Playback interface.
Mouse: right click a channel in live view mode and select All-day Playback from the menu, as shown in
Figure 6.2.
63
User Manual of Digital Video Recorder
Figure 6.2 Right-click Menu under Live View
Press PLAY button on the IR remote control to play back record files of the channel under single-screen live view.
Under multi-screen live view, record files of the selected channel will be played back.
Note: Pressing numerical buttons will switch playback to the corresponding channels during playback process.
2. Playback management.
The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in
Figure 6.3.
Figure 6.3 All-day Playback Interface
The channel and time selection menu displays by moving the mouse to the right of the playback interface.
Click the channel(s) if you want to switch playback to another channel or execute simultaneous playback of multiple channels, as shown in Figure 6.4.
64
User Manual of Digital Video Recorder
Figure 6.4 All-day Playback Interface with Channel List
Dates marked in different colors:
: No record files in this day.
: There is record file(s) in this day (not current day).
: There is only event recording file(s) in this day (not current day).
: Mouse cursor is located.
Figure 6.5 Toolbar of All-day Playback
Table 6.1 Detailed Explanation of All-day-playback Toolbar
Button
/
Operation
Audio on /Mute
Add default tag
Button
/
Operation
Start/Stop clipping
Add customized tag
Button Operation Button Operation
30s forward
30s reverse
Tag management
Speed down
/
Pause reverse play/
Reverse play/
Single-frame reverse play
Previous day
Process bar
/
Pause play/
Play/
Single-frame play
Stop Speed up
Next day
Video type bar
Hide Exit
Notes:
1. Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames.
65
advertisement
Key Features
- PAL/NTSC adaptive video inputs
- H.264 video compression
- Encoding at up to WD1 resolution
- Dual-stream support per channel
- Independent configuration for each channel
- Motion detection alarm
- Multiple PTZ protocols supported
- Remote control and monitoring
- Backup to USB, SATA, or eSATA
- Embedded Web server
