ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M Digital Video Recorder User Manual
Below you will find brief information for Digital Video Recorder ADVR-0410H1M, Digital Video Recorder ADVR-0820H2M, Digital Video Recorder ADVR-1640H2M. This user manual describes how to install, configure, and operate the device, including live view, recording, playback, alarm settings, network settings, HDD management, camera settings, device management and maintenance, and other features. The manual also provides user tips and troubleshooting advice for common issues. It is recommended to read the user manual carefully before starting to use the device.
advertisement
User Manual of Digital Video Recorder play
Previous file
Hide toolbar
Next file
Progress bar
Video search
Video type bar
Note:
1. Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames.
2. About video type bar: represents normal recording (manual or schedule); represents event recording; represents smart search recording.
Exit
6.1.4 Playing Back by Event Search
Purpose:
Play back record files on one or several channels searched out by restricting event type (motion detection or alarm input). Channel switch is supported.
Steps:
1. Enter the playback interface.
Menu>Playback
2. Select Event tab to enter the Event Playback interface.
3. Select Motion as the event type.
4. Set the start time and end time for the selected event.
Figure 6.16 Video Search by Alarm Input
71
User Manual of Digital Video Recorder
Figure 6.17 Video Search by Motion Detection
5. Select the camera (s) for searching of motion detected triggered record files or select the alarm input (s) for the alarm triggered record files.
6. Click Search button to enter the Search Result interface.
Figure 6.18 Search Result of Alarm Input
72
User Manual of Digital Video Recorder
Figure 6. 19 Search Result of Motion Detection
The Pre-play and post-play can be configured. The Pre-play refers to the time configured before the defined start time of event search, and the Post-play refers to the time configured after the defined end time of event search. For example, when the start time and end time of event search are set to 12:00:00 -
13:00:00, and the pre-play and post-play time is set to 30s and 20s respectively, then the actual playback of event video file is 11:59:30 ~ 13:00:20.
7. You can select an item from the list and click Details to view detailed information of the record file, e.g. start time, end time, file size, etc.
Figure 6.20 Event Details
Or you can directly click the button of each file item to enter its playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process.
73
User Manual of Digital Video Recorder
Figure 6.21 Interface of Playback by Event (1)
The hidden list of events will be displayed by moving the mouse to the right of the playback interface.
Figure 6.22 Interface of Playback by Event (2)
Button
/
Figure 6.23 Toolbar of Playback by Event
Table 6.4 Detailed Explanation of Playback-by-event Toolbar
Operation
Audio on/Mute
Button
/
Operation
Start/Stop clipping
Button Operation Button Operation
30s forward 30s reverse
74
advertisement
Key Features
- PAL/NTSC adaptive video inputs
- H.264 video compression
- Encoding at up to WD1 resolution
- Dual-stream support per channel
- Independent configuration for each channel
- Motion detection alarm
- Multiple PTZ protocols supported
- Remote control and monitoring
- Backup to USB, SATA, or eSATA
- Embedded Web server
