ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M Digital Video Recorder User Manual

Below you will find brief information for Digital Video Recorder ADVR-0410H1M, Digital Video Recorder ADVR-0820H2M, Digital Video Recorder ADVR-1640H2M. This user manual describes how to install, configure, and operate the device, including live view, recording, playback, alarm settings, network settings, HDD management, camera settings, device management and maintenance, and other features. The manual also provides user tips and troubleshooting advice for common issues. It is recommended to read the user manual carefully before starting to use the device.

User Manual of Digital Video Recorder

3. Select the backup device from the dropdown list of Device Name.

Note:

Click the Refresh button if the connected local backup device cannot be displayed. When it fails to detect the backup device, please check whether it is compatible with the device. You can format the backup device if the format is incorrect.

Figure 9.30 Export Network Packet

4. Click the Export button to start exporting.

5. After the exporting is complete, click OK to finish the packet export.

Figure 9.31 Packet Export Attention

Note:

Up to 1M data can be exported each time.

9.4.3 Checking Network Status

Purpose:

You can also check the network status and quick set the network parameters in this interface.

Steps:

Click Status on the right bottom of the page.

126

User Manual of Digital Video Recorder

Figure 9.32 Checking Network Status

If the network is normal the following message box pops out.

Figure 9.33 Network Status Checking Result

If the message box pops out with other information instead of this one, you can click Network button to show the quick setting interface of the network parameters.

Figure 9.34 Network Parameters Configuration

127

Key Features

PAL/NTSC adaptive video inputs
H.264 video compression
Encoding at up to WD1 resolution
Dual-stream support per channel
Independent configuration for each channel
Motion detection alarm
Multiple PTZ protocols supported
Remote control and monitoring
Backup to USB, SATA, or eSATA
Embedded Web server

Questions & Answers

2024-11-08

F F I

Where are recordings saved?

Recordings are saved on the SATA hard disk(s). The ADVR-0410H1M supports one disk, while the ADVR-0820H2M/ADVR-1640H2M models support up to two.

What is the maximum storage capacity per hard disk?

Each hard disk can hold up to 4TB of data.

How can I access recorded files?

Recorded files can be viewed in the Playback menu. Searching is possible by channel, time, event, tag, and system log.

Frequently Answers and Questions

What are the supported models for this user manual?

This manual is applicable to the following models: ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M.

What are the key features of this digital video recorder?

This device supports PAL/NTSC adaptive video inputs, H.264 video compression, encoding at up to WD1 resolution, dual-stream per channel, independent configuration for each channel, motion detection alarm, multiple PTZ protocols, remote control and monitoring, backup to USB, SATA, or eSATA, and embedded Web server.

How do I start up and shut down the device?

To start up the device, ensure the power supply is plugged in and press the POWER button on the rear panel. To shut down the device, enter the Shutdown menu, click the Shutdown button, and then turn off the power switch on the rear panel.

Related manuals

Download PDF

ADVR-0410H1M, ADVR-0820H2M, ADVR-1640H2M Digital Video Recorder User Manual