V8plus Body Shaping System User Manual

If there is no time left, the equipment is locked on;

 After user giving payment to agent, the agent would issue a user card with 14,400 minutes again and give it to user;

 If user wants to buy the equipment, the agent could give key card to user after receiving payment.

2. Beauty salon

1) The beauty salon take charge by renting card and taking count of treatment course and treatment times;

2) 10 times/treatment course and 30 minutes/time;

The beauty salon could take following measures to manage：

 Enter interface of issuing card with key card and set time:300 minutes (10 times *30 minutes/time)；

 Put blank card or user card on A in picture 16;

The sound you hear shows succeed in issuing user card；

 Exit from issuing interface, make issued user card touch A in picture 16. Give customer card and equipment to customer（The beauty salon keeps the key card）；

 When use the equipment, must insert user card into slot (on the top of the back of equipment);

Set the time:30 minutes;

After 30 minutes, the equipment stops working and make two sounds;

 After treatment, the customer takes away the user card.

3.8 Warning for Handpiece Detection

Picture 25 Picture 26 Picture 27

Main operation interface would show “Please check the handpiece” (picture 27) if following situations happens:

1) A in picture 25 (no handpiece is selected);

2) A in picture 26 (handpiece isn’t installed).

3.9 To Turn off Equipment

Under standby condition, press “

Press the power supply button.

”, exit from main operation interface to main menu interface;

16