advertisement
15.2
Record
The Record menu allows you to configure recording settings, such as the recording resolution, recording schedule, and audio recording.
15.2.1
Configuring Pre-recording Settings
1. Select the Rec Para tab.
2. In the Channel drop-down menu, select the desired channel you wish to configure.
3. In the PreRecord drop-down menu, select Enable to enable pre-recording or Disable to disable pre-recording.
4. Click Apply to save your settings.
15.2.2
Configuring the Recording Schedule (Continuous, Motion, Alarm)
To configure the recording schedule:
1. Click the Schedule tab.
2. Configure the following:
• Channel: Select the channel you wish to configure the schedule for.
• Week: Select the day of the week you wish to configure.
#LX400008; r. 2.0/12067/12067; en-US
46
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 11 Important Safeguards
- 11 General Precautions
- 11 Installation
- 13 Service
- 14 LH030 Series Features
- 15 Getting Started (LH030 Series)
- 16 Front Panel (LH030 Series)
- 17 Rear Panel (LH030 Series)
- 19 Basic Setup (LH030 Series)
- 19 Step 1: Connect the BNC Cameras
- 19 Step 2: Connect the Mouse
- 19 Step 3: Connect the Ethernet Cable
- 19 Step 4: Connect the Monitor
- 20 Step 5: Connect the Power Adapter and Power on the DVR
- 20 Step 6: Upgrade Firmware to Latest Version (if Available)
- 21 Step 7: Verify Camera Image
- 21 Step 8: Set the Time
- 21 Default System Password & Port Numbers
- 22 Lorex Stratus Connectivity
- 22 Quick Access to System Information
- 22 Connecting Cameras
- 22 6.11.1 Installing Cameras
- 23 6.11.2 Connecting BNC Cameras to your DVR
- 24 6.11.3 Connecting and Removing BNC Cables
- 25 Mouse Control
- 26 Remote Control
- 28 Using the On-Screen Display
- 28 Using the Menu Bar
- 29 Using the Virtual Keyboard and Mini-Keyboard
- 30 Using the Zoom Mode
- 30 Using Picture in Picture (PIP) Mode
- 32 Setting the Date and Time
- 32 Configuring Daylight Savings Time (DST)
- 33 Using a NTP Server to set your System Time
- 35 Recording
- 35 Recording Audio
- 36 Playback
- 36 Playing Back Recorded Video
- 37 12.1.1 Using Playback Controls
- 38 12.1.2 Finding Events in the Playback Bar
- 39 12.1.3 Controlling the Time Range of the Playback Bar
- 39 12.1.4 Using Zoom in Playback Mode
- 40 Quick Playback
- 42 Backup
- 42 Backing Up Video
- 43 Using Video Clip Backup
- 44 Viewing Backed Up Video
- 45 Managing Passwords
- 45 Changing Passwords
- 46 Adding Users
- 49 Using the Main Menu
- 50 Display
- 50 15.1.1 Configuring Custom Channel Names
- 50 15.1.2 Changing the Position of the Channel Name
- 50 15.1.3 Adjusting Camera Color Settings
- 51 15.1.4 Enabling Covert Recording
- 51 15.1.5 Configuring the Time and Recording Time Display
- 51 15.1.6 Configuring Sequence Time
- 52 15.1.7 Changing the Video-out Resolution
- 52 Screen
- 53 15.1.9 Adjusting Menu Transparency
- 53 15.1.10 Adjusting the Video Margin
- 53 15.1.11 Adding Privacy Zones
- 54 15.1.12 Creating a Custom Split-screen Display
- 56 Record
- 56 15.2.1 Configuring Pre-recording Settings
- 56 Alarm)
- 57 15.2.3 Enabling Audio Recording
- 58 Frame Rate
- 60 Search
- 60 15.3.1 Using the Event Search
- 61 15.3.2 Using the Log Search
- 62 Network
- 62 15.4.1 Configuring Network Type: DHCP & Static IP
- 62 15.4.2 Enabling Auto Port Forwarding
- 62 15.4.3 Changing the DVR’s Client and HTTP Port
- 63 15.4.4 Adjusting Remote Connectivity Streaming Rates
- 64 15.4.5 Setting up Email Notification
- 65 15.4.6 Configuring DDNS settings
- 66 Alarm
- 66 15.5.1 Configuring Motion Detection
- 67 15.5.2 Configuring Alarm Settings
- 69 Device
- 69 15.6.1 Formatting the Hard Drive
- 69 15.6.2 Configuring Overwrite
- 70 15.6.3 Formatting USB Flash Drives
- 71 System
- 71 15.7.1 Changing Date Format
- 71 15.7.2 Changing Time Format
- 71 15.7.3 Changing the System Language
- 71 15.7.4 Changing Video Output - NTSC & PAL
- 71 15.7.5 Configuring Menu Time Out and Auto Logout
- 71 15.7.6 Adding Users & Changing the Admin Password
- 72 15.7.7 Viewing System Information
- 72 15.7.8 Setting the Remote Control ID
- 73 Advanced
- 73 15.8.1 Configuring Firmware Upgrades
- 73 Drive
- 74 15.8.3 Restoring to Factory Default Settings
- 75 15.8.4 Restarting or Shutting Down the DVR
- 76 15.8.5 Configuring System Warnings
- 77 Drive
- 79 Connecting to Your DVR Over the Internet on PC or Mac
- 79 System Requirements
- 79 Step 1 of 3: Connect your DVR to Your Router
- 80 Step 2 of 3: Obtain the DVR’s Device ID
- 81 Step 3 of 3: Connect to the DVR Over the Internet
- 83 Using the PC/Mac Client Software
- 84 Changing Viewing Modes
- 84 Taking Screen Shots
- 84 Recording Video
- 85 Showing / Hiding Channels
- 85 Viewing the Bit Rate
- 86 Video
- 86 Changing the Format of Recorded Video (PC Only)
- 87 Configuring PTZ Settings
- 88 Video Playback
- 90 17.9.1 Video Playback Controls
- 91 Configuring Display Settings
- 91 Configuring Privacy Zone Settings
- 92 Configuring Recording Parameters
- 92 Configuring the Recording Schedule
- 93 Configuring System Recording Quality
- 94 Configuring Basic Network Settings
- 94 Configuring the System Substream
- 95 Configuring Email Notification Settings
- 96 Configuring DDNS Settings
- 97 Configuring Motion Detection Settings
- 98 Configuring your System to "Beep" During Motion
- 98 Configuring Alarm Notifications
- 99 Configuring Hard Drive Recording Mode
- 99 Configuring PTZ Parameters
- 100 Configuring the System Time and Date
- 101 Changing the System’s Menu Time Out
- 101 Configuring System User Accounts
- 102 Viewing System Information
- 102 Configuring Firmware Upgrades
- 102 Manually Upgrading System Firmware
- 103 Restoring Default Settings
- 104 Configuring Event Settings
- 105 Mobile Apps: Accessing your DVR Using a Mobile Device
- 105 Supported Apps and Platforms
- 105 iPhone
- 105 18.2.1 Connecting to Your System Using Lorex Eco Stratus
- 107 18.2.2 Lorex Eco Stratus Interface
- 108 18.2.3 Taking Screenshots
- 108 18.2.4 Taking Manual Recordings
- 108 18.2.5 Using PTZ Controls
- 109 18.2.6 Using Remote Playback Mode on iPhone
- 111 18.2.7 Viewing Screenshots
- 112 18.2.8 Viewing Manual Recordings
- 113 18.2.9 Using Device Manager to Manage DVR’s
- 114 18.3.1 Prerequisites
- 114 18.3.2 Connecting to your DVR
- 117 18.3.3 Live View Interface
- 117 18.3.4 Taking Screenshots
- 117 18.3.5 Taking Manual Recordings
- 118 18.3.6 Using PTZ Controls
- 118 18.3.7 Using Remote Playback Mode
- 120 18.3.8 Viewing Screenshots
- 121 18.3.9 Viewing Manual Recordings
- 122 18.3.10 Using Device Manager to Manage DVRs
- 123 18.3.11 Managing Favorites
- 124 Android
- 124 18.4.1 Connecting to Your System Using Lorex Eco Stratus
- 126 18.4.2 Lorex Eco Stratus Interface
- 127 18.4.3 Taking Screenshots
- 127 18.4.4 Taking Manual Recordings
- 127 18.4.5 Using PTZ Controls
- 128 18.4.6 Using Remote Playback Mode on Android
- 130 18.4.7 Viewing Screenshots
- 132 18.4.8 Viewing Manual Recordings
- 133 18.4.9 Using Device Manager to Manage DVR’s
- 135 Lorex Player 11: Playing Backed up Video on PC
- 135 Running Lorex Player
- 136 Lorex Player 11 Interface Overview
- 136 19.2.1 About the Advanced Config Menu
- 137 Converting Backed Up Video to AVI Files
- 139 Lorex Player for Mac: Viewing Backed up Video on Mac
- 139 Opening Individual Video Files
- 139 Loading Multiple Video Files
- 140 Lorex Player for Mac Interface
- 141 Connecting a PTZ Camera (LH030 Series)
- 141 Configuring PTZ Settings
- 142 Using the PTZ Menu (Local DVR)
- 143 PTZ Presets and PTZ Cruise
- 143 21.3.1 PTZ Preset Controls
- 143 21.3.2 Setting PTZ Presets
- 144 21.3.3 Selecting PTZ Presets
- 144 21.3.4 Deleting PTZ Presets
- 144 21.3.5 Starting / Stopping PTZ Cruise
- 145 Connecting Additional External Monitors (LH030 Series)
- 145 Connecting the DVR to TV RCA Ports
- 145 Monitor
- 147 Recording Audio (LH030 Series)
- 148 Replacing the Hard Drive (LH030 Series)
- 148 Removing the Hard Drive
- 149 Installing the Hard Drive
- 150 Formatting the Hard Drive
- 152 DDNS Setup (Advanced)
- 152 Accessing your DVR within a local network (LAN)
- 152 Network
- 153 25.1.2 Step 2 of 3: Obtain the DVR’s Local IP Address
- 153 25.1.3 Step 3 of 3: Connect to the DVR’s Local IP Address
- 155 DDNS Setup—Access your DVR Remotely over the Internet
- 155 25.2.1 Step 1 of 4: Port Forwarding
- 156 25.2.2 Step 2 of 4: Create a DDNS Account
- 160 25.2.3 Step 3 of 4: Enable DDNS on the DVR
- 160 25.2.4 Step 4 of 4: Connect to the DVR’s DDNS Address
- 163 Troubleshooting
- 166 LH030 Series System Specifications
- 169 Notices
- 169 FCC/IC Notice
- 169 Modification