X-Way Routing
General
Introduction
A multi-network architecture consists of several networks. Two levels of architecture are distinguished:
Multi-module architectures, in which there are several networks but no communication between these different segments is provided by the communication system.
Multi-network architectures, composed of several network segments interconnected by bridge stations. Communication transparency is then provided in the equipment group present in this type of architecture.
This chapter describes how to set up the bridge function in a Premium PLC station, as well as the use of communication services in a multi-network architecture. The multi-network architecture complies with X-Way communication standards.
To set up stations on different networks, refer to the documentation corresponding to the module used.
NOTE: X-Way communication is not available for Modicon M340 PLCs.
52
35010500 10/2014
