Step 5: Connect the Power Adapter and Power on the DVR. Lorex LH1608, LH1624, LH160 ECO6 SERIES, LH1612, LH1616

Add to my manuals
176 Pages

advertisement

Step 5: Connect the Power Adapter and Power on the DVR. Lorex LH1608, LH1624, LH160 ECO6 SERIES, LH1612, LH1616 | Manualzz

6 Basic Setup (LH160 Series)

1

2

1.

VGA port.

2.

HDMI port.

6.5

Step 5: Connect the Power Adapter and Power on the DVR

1. Connect the included power adapter to the DC 12V port. Connect the end of the power adapter to a wall socket or a surge protector.

2. Turn the power switch to I to turn on the DVR.

At startup, the system performs a basic system check and runs an initial loading sequence.

After a few moments, the system loads a live display view.

6.6

Step 6: Upgrade Firmware to Latest Version (if Available)

If a firmware upgrade is available, you will be asked to install it once the DVR starts up. It is required to upgrade your system firmware and client software or mobile apps to the latest version to enable remote connection to the system.

If a firmware upgrade is available:

1. After startup, a notification will appear asking you to upgrade the firmware. Click Yes to upgrade.

#LX400007; r. 1.0/12121/12123; en-US

10

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents