MULTI PIP. Panasonic TH-50PF11UK, TH-65PF11UK, TH-58PF11UK, TH-65PF11EKOL, TH-42PF11UK

ASPECT Controls

For PC signal input:

4:3 Zoom 16:9

For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p):

4:3 Zoom1 Zoom2 Zoom3 16:9 14:9 Just

For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:

4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just1 Just2 4:3 (1) 4:3 (2)

MULTI PIP

You can display two pictures, such as a video image and computer image, in a two-screen display. (Use the remote control for this operation. It cannot be performed with the buttons on the main unit.)

MULTI PIP SETUP

Set the functions and mode for two-screen display in “MULTI PIP SETUP” in the SET UP menu.

(see page 36)

Selecting the Display Mode

Each time this button is pressed, the screen changes.

Note:

The screen changes in the same way when “DISPLAY MODE” in “MULTI PIP SETUP” is changed. (see page 36)

During PIP:

One screen Two screens (P AND P)

INPUT1 PC

Main screen input mode

During Advanced PIP:

One screen Advanced PIP

–

Sub screen

1

Main screen

Two screens (P IN P)

INPUT1

PC

Main screen Sub screen

Two screens (P OUT P)

INPUT1

PC

Sub screen input mode

2 3

4

8 7 6 5

Note:

and

button operations are not available during advanced PIP.

19

MULTI PIP

During Blend PIP (Composite Screen Function) :

A composite picture is displayed with the sub screen positioned over the main screen. For example, text data such as a computer image can be displayed as a caption over a movie or still image.

One screen FULL P IN P

Transparent Function and Insertion Function

Two functions are available for blend PIP: the transparent function and the insertion function. Set these functions with

“TRANSPARENCY” or “INSERT” in “MULTI PIP SETUP”. (see page 36)

Transparent Function

Data such as text are displayed transparently on the background image.

Insertion Function

The sub screen image is divided into transparent and nontransparent areas, and only the non-transparent areas are inserted and displayed on the background image.

Note:

Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the blend

PIP function to make a composite screen display, you may be violating the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other people for commercial purposes without the prior permission of the copyright holder.

Swapping Screens

Each time this button is pressed, the main screen and sub screen are swapped.

Two screens

(P AND P)

Two screens

(P OUT P)

Two screens

(P IN P)

Main screen Sub screen

20

MULTI PIP

Selecting the Target Screen for Operations

Each time this button is pressed, the target screen for operations changes.

Operations on the main screen

INPUT1

PC

Operations on the sub screen

INPUT1

PC

Main screen Sub screen

Main screen input mode Sub screen input mode

Notes:

• When operations are performed for the sub screen, the sub screen audio is played.

• If no operations are performed, the operation target returns to the main screen after about 5 seconds*. You can also return to main screen operations by operating the remote control buttons (except for ).

* It takes more than 5 seconds if a slot mounted with a Dual HDMI Terminal Board (TY-FB10HMD) is selected.

Selecting the Sub Screen Position (During P IN P Display)

Each time this button is pressed, the sub screen position changes.

Note:

Some sub screen positions may hide the display of the menu screen.

Notes:

• Do not use the two-screen display for a long time. It will cause a permanent image retention to remain on the screen.

• If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.

• Sound output is from the picture which is selected in AUDIO OUT (PIP) (see page 28).

• In two-screen display, the same input mode cannot be selected for the main picture and sub picture.

• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the two-screen display mode.

• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.

• Computer screen picture is displayed in a simplifi ed format, and it may not be possible to discern details on them satisfactorily.

• Following combinations of two analog signals cannot be displayed simultaneously;

Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)

• 2k1k signals that are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD) cannot be displayed in two-screen display.

21