SET UP for MULTI DISPLAY. Panasonic TH-50PF11UK, TH-65PF11UK, TH-58PF11UK, TH-65PF11EKOL, TH-42PF11UK
Add to my manuals60 Pages
advertisement
SET UP for MULTI DISPLAY
By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a Display number to determine its location.
(Example) group of 4 (2 × 2) group of 9 (3 × 3) group of 16 (4 × 4) group of 25 (5 × 5)
How to setup MULTI DISPLAY
1
2
3
Press to display the SET UP menu.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” menu.
Press to select the menu to adjust.
Press to adjust the menu.
SET UP 2/2
MULTI DISPLAY SETUP
MULTI PIP SETUP
PORTRAIT SETUP
SET UP TIMER
PRESENT TIME SETUP
DISPLAY ORIENTATION LANDSCAPE
MULTI DISPLAY SETUP
MULTI DISPLAY SETUP
HORIZONTAL SCALE
VERTICAL SCALE
SEAM HIDES VIDEO
LOCATION
AI-SYNCHRONIZATION
OFF
× 2
× 2
OFF
A1
OFF
Item
MULTI DISPLAY SETUP
HORIZONTAL SCALE
VERTICAL SCALE
Details
Select “ON” or “OFF”.
Note: If you set MULTI DISPLAY SETUP to ON, PORTRAIT SETUP will be unavailable.
Select “× 1”, “× 2”, “× 3”, “× 4”, “× 5”.
Select “× 1”, “× 2”, “× 3”, “× 4”, “× 5”.
Select “ON” or “OFF”.
To hide joints between displays.
To show joints between displays.
SEAM HIDES VIDEO
LOCATION
Suitable for moving image display.
ON
Suitable for still image display.
OFF
Select the required arrangement number. (A1-E5 : Refer to the following)
Display Number locations for each arrangement.
(Examples)
( 2 × 1) ( 2 × 3 ) ( 4 × 2 ) ( 4 × 4 ) ( 5 × 5 )
A1
B1
C1
D1
E1
A2
B2
C2
D2
E2
A3
B3
C3
D3
E3
A4
B4
C4
D4
E4
A5
B5
C5
D5
E5
34
Item
Select “OFF” or “ON”.
SET UP for MULTI DISPLAY
Details
The brightness depends on each display’s setting.
Equalize the brightness of all the displays.
4
AI-SYNCRONIZATION
OFF ON
Note:
If you set AI-SYNCRONIZATION to ON, the following menus will be unavailable and these settings will be fi xed to the initial values.
PICTURE menu: COLOR, TINT, INPUT LEVEL (ADVANCED SETTINGS)
Press to exit from adjust mode.
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
2
3
4
Switch to on the right side.
Press the button on the remote control.
Press one of - , for the tens digit setting.
Press one of - , for the units digit setting.
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become the ID number for the remote control.
ID remote control button operation
The operation is the same as normal remote control except for the button.
ID Cancellation
Press button on remote control. (This has the same effect as pressing the , , buttons at the same time.)
Notes:
• Set the Remote ID “On” to operate the ID remote control.
If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.
(see page 45)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not the same as the ID select number (see page 45).
35
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 TABLE OF CONTENTS
- 3 Important Safety Instructions
- 5 FCC STATEMENT
- 6 Safety Precautions
- 7 Maintenance
- 8 Accessories
- 8 Accessories Supplied
- 8 Remote Control Batteries
- 9 Connections
- 10 PC Input Terminals connection
- 11 SERIAL Terminals connection
- 12 HDMI connection
- 12 COMPONENT / RGB connection
- 13 Power ON / OFF
- 15 Initial selections
- 15 Selecting the input signal
- 15 Selecting the On-Screen Menu Language
- 16 Basic Controls
- 18 ASPECT Controls
- 19 MULTI PIP
- 22 Digital Zoom
- 23 On-Screen Menu Displays
- 24 Adjusting POS. /SIZE
- 26 PICTURE Adjustments
- 27 ADVANCED SETTINGS
- 28 SOUND Adjustment
- 28 SDI SOUND OUTPUT
- 29 PRESENT TIME SETUP / SET UP TIMER
- 29 PRESENT TIME SETUP
- 29 SET UP TIMER
- 30 SCREENSAVER (For preventing image retention)
- 30 Setup of SCREENSAVER Time
- 31 Reduces screen image retention
- 31 SIDE BAR ADJUST
- 32 Reduces power consumption
- 33 Customizing the Input labels
- 33 DISPLAY ORIENTATION
- 34 SET UP for MULTI DISPLAY
- 34 How to setup MULTI DISPLAY
- 35 ID Remote Control Function
- 36 MULTI PIP SETUP
- 37 SET UP for PORTRAIT
- 37 How to setup PORTRAIT
- 39 SET UP for Input Signals
- 39 COMPONENT / RGB IN SELECT
- 39 YUV / RGB IN SELECT
- 40 SIGNAL menu
- 40 3D Y/C FILTER
- 41 COLOR SYSTEM / Panasonic AUTO
- 41 3:2 PULLDOWN
- 41 XGA MODE
- 42 REFRESH RATE
- 42 NOISE REDUCTION
- 43 SYNC
- 43 SDI THROUGH
- 43 Input signal display
- 44 Options Adjustments
- 47 Weekly Command Timer
- 48 Shipping condition
- 49 Troubleshooting
- 50 List of Aspect Modes
- 51 Applicable Input Signals
- 53 Command list of Weekly Command Timer
- 54 Specifications
- 56 Panasonic Professional Flat Panel Display Limited Warranty
- 57 LIMITED WARRANTY STATEMENT
- 58 Customer Service