advertisement
Troubleshooting
Should any problem persist, contact your dealer.
Problem Cause
Power does not turn on.
No picture appears.
The picture is fuzzy.
The color is pale or grayish.
The Remote control does not operate.
The picture does not display correctly.
Picture from a computer does not appear.
The power cord may not be connected.
The MAIN POWER switch is turned off.
No electric supply is at the wall outlet.
TEMP indicator is lit or flashes.
LAMP indicator is lit or flashes.
The lamp unit cover has not been securely installed.
The circuit breakers have tripped.
The video signal input source may not be connected to a terminal properly.
The input selection setting may not be correct.
The BRIGHTNESS adjustment setting may be at the minimum setting.
The SHUTTER function may be in use.
The lens cover may still be attached to the lens.
The lens focus may not have been set correctly.
The projector may not be at the correct distance from the screen.
The lens may be dirty.
The projector may be tilted too much.
COLOR or TINT adjustment may be incorrect.
The input source which is connected to the projector may not be adjusted correctly.
The batteries may be weak.
The batteries may not have been inserted correctly.
The remote control signal receptor on the projector may be obstructed.
The remote control unit may be out of the operation range.
The signal format (TV-SYSTEM) may not have been set correctly.
There may be a problem with the VCR or other signal source.
A signal which is not compatible with the projector is being input.
The cable may be longer than the optional cable.
The external video output from a laptop computer may not be correct.
(You may be able to change the external output settings by pressing the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method varies depending on the type of computer; refer to the documentation provided with your computer for further details.)
Reference page
-
-
-
-
46 -
E
NGLISH
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Important Safety Notice
- 4 Contents
- 6 Precautions with regard to safety
- 6 WARNINGS
- 8 CAUTIONS
- 9 Cautions when transporting
- 9 Cautions when installing
- 10 Cautions on use
- 10 Accessories
- 11 About Your Projector
- 11 Remote control
- 12 Projector body
- 14 Setting up
- 14 Screen size and throw distance
- 15 Projection method
- 15 Front leg adjusters and throwing angle
- 16 Lens shift and positioning
- 18 Connections
- 18 Before connecting to the projector
- 18 Connecting to COMPONENT IN/VIDEO IN/S-VIDEO IN
- 18 Connecting to COMPUTER IN/HDMI IN
- 19 Switching the projector on/off
- 19 Power cord
- 19 POWER indicator
- 20 Switching on the projector
- 20 Switching off the projector
- 21 Projecting an image
- 21 Selecting the input signal
- 21 Positioning the image
- 22 Remote control operation
- 22 Operating range
- 22 Turning on the button backlight
- 22 Resetting to the factory default settings
- 22 Capturing an image
- 23 Switching the input signal
- 23 Switching the aspect ratio
- 23 Loading a saved setting
- 24 Adjusting the signal condition with a waveform
- 25 Adjusting the focus and zoom
- 25 Switching the picture mode
- 25 Adjusting the image
- 25 Switching off the projector automatically
- 26 Setting your own color profile
- 28 Menu Navigation
- 28 Main menu and sub-menu
- 30 Navigating through the MENU
- 31 PICTURE menu
- 31 PICTURE MODE
- 31 CONTRAST
- 31 BRIGHTNESS
- 31 COLOR
- 31 TINT
- 31 SHARPNESS
- 32 COLOR TEMPERATURE
- 32 DYNAMIC IRIS
- 32 WAVEFORM MONITOR
- 32 SPLIT ADJUST
- 33 ADVANCED MENU
- 34 MEMORY SAVE
- 34 MEMORY LOAD
- 35 MEMORY EDIT
- 35 SIGNAL MODE
- 36 POSITION menu
- 36 H-POSITION
- 36 V-POSITION
- 36 DOT CLOCK
- 36 CLOCK PHASE
- 36 ASPECT
- 38 WSS
- 38 OVER SCAN
- 38 KEYSTONE
- 38 AUTO SETUP
- 39 LENS CONTROL
- 39 ZOOM/FOCUS
- 39 FUNCTION BUTTON
- 39 BUTTON1/2/3
- 40 OPTION menu
- 40 INPUT GUIDE
- 40 OSD DESIGN
- 40 OSD POSITION
- 40 BACK COLOR
- 40 STARTUP LOGO
- 40 AUTO SEARCH
- 40 HDMI SIGNAL LEVEL
- 40 FRAME RESPONSE
- 41 INSTALLATION
- 41 SLEEP
- 41 ALTITUDE
- 41 LAMP POWER
- 41 LAMP RUNTIME
- 42 TEMP and LAMP Indicators
- 42 Managing the indicated problems
- 43 Care and Replacement
- 43 Cleaning the projector
- 44 Replacing the lamp unit
- 46 Troubleshooting
- 47 Technical Information
- 47 List of compatible signals
- 48 Serial terminal
- 51 Ceiling mount bracket safeguards
- 52 Specifications
- 54 Dimensions
- 55 Trademark acknowledgements
- 56 Index
- 56 A
- 56 B
- 56 C
- 56 D
- 56 E
- 56 F
- 56 G
- 56 H
- 56 I
- 56 K
- 56 L
- 57 M
- 57 N
- 57 O
- 57 P
- 57 R
- 57 S
- 57 T
- 57 V
- 57 W
- 57 X
- 57 Z