AdrenaLinn III Manual

Chapter 1: Quick Start

The

Details

Settings

Notice that most of the cells in the 8 by 4 parameter matrix have an additional parameter printed smaller to the right in italics. These are circled below:

These lesser-used settings are called Details settings. To view or edit these settings, briefly press the UP ARROW and DOWN

ARROW buttons at the same time.

The 3-digit display will blink to indicate Details Mode is active. You can now view or edit any of the Details settings as you would the normal settings. For example, to edit the Reverb‘s TIME setting:

1. Turn Details mode ON by pressing UP and DOWN

ARROW buttons simultaneously. (The 3-digit display blinks.)

2. Press repeatedly either the UP or DOWN ARROW buttons to select row 6 containing the Reverb settings.

3. Turn the rotary knob above column 3 to adjust TIME.

Notice that some cells in the 4 x 8 matrix do not have a Detail setting. If one of these is selected, the display will show ―---―.

To exit Details Mode and return to viewing and editing the normal settings, again press the UP ARROW and DOWN ARROW buttons at the same time.

7