COMPATIBLE SENSORS
Polar Heart rate Sensor Bluetooth® Smart
Pair a Heart Rate Sensor with V650
Polar Speed Sensor Bluetooth® Smart
Pair Speed sensor with V650
Polar Cadence Sensor Bluetooth® Smart
Pair Cadence sensor with V650
Polar LOOK Kéo Power Sensor Bluetooth® Smart
Pair Kéo Power with V650
Power Settings on V650
Calibrate Kéo Power
POLAR HEART RATE SENSOR BLUETOOTH® SMART
Polar heart rate sensor consists of comfortable strap and connector. It detects your heart rate accurately and sends the data to the V650 in real time.
Heart rate data gives you an insight into your physical condition and how your body responds to training.
Although there are many subjective clues as to how your body is doing during exercise (perceived exertion, breathing rate, physical sensations), none is as reliable as measuring heart rate. It is objective and is affected by both internal and external factors - meaning you will have a dependable measure of your physical state.
PAIR A HEART RATE SENSOR WITH V650
1. Wear your heart rate sensor as instructed in
Wear the Heart Rate Sensor
and go to
Settings
>
General
Settings
>
Pairing
>
Pair new device
.
2. V650 lists the devices it finds. Tap the one you want to pair.
3.
Pairing succeeded
tells you that the pairing is complete.
POLAR SPEED SENSOR BLUETOOTH® SMART
There are a range of factors that can affect your cycling speed. Obviously fitness is one of them, however, weather conditions and the varying gradients of the road play a huge part too. The most advanced way of
27
28
28
29
29
27
27
27
29
30
31
measuring how these factors affect your performance speed is with the aerodynamic speed sensor.
l
Measures your current, average and maximum speeds l
Track your average speed to see your progress and performance improve l
Light yet tough, and easy to attach
PAIR SPEED SENSOR WITH V650
Make sure the speed sensor has been correctly installed. For more information on installing the speed sensor refer to the user manual of the speed sensor.
1. Go to
General Settings
>
Pairing
>
Pair new device
. The V650 should be less than three meters from the sensor you want to pair. It's close enough when it's mounted on the handlebar.
2. Activate the sensor you want to pair. Rotate the wheel a few times to activate the sensor. The flashing red light in the sensor indicates that you've activated the sensor.
Do the pairing within 30 seconds of the sensor activation.
3. V650 lists the devices it finds. The device closest to V650 is at the top of the list. Tap the device you want to pair.
4.
Pairing succeeded
tells you that the pairing is complete.
5. Link the sensor to
Bike 1
,
Bike 2
,
Bike 3
or
Bike 4
. You can change the bike later in
Paired devices
.
6. Set the wheel size. Confirm and return to the
PAIRING
menu by tapping
When you select a bike for a ride, your V650 automatically starts searching for the sensors you've linked to the bike. V650 is ready once the green circle around the sensor indicator is static.
POLAR CADENCE SENSOR BLUETOOTH® SMART
The most practical way of measuring your cycling session is with our advanced wireless cadence sensor. It measures your real-time, average and maximum cycling cadence as revolutions per minute so you can compare the technique of your ride against previous rides.
l
Improves your cycling technique and identifies your optimal cadence l
Interference-free cadence data lets you evaluate your individual performance
28
l
Designed to be aerodynamic and light
PAIR CADENCE SENSOR WITH V650
Make sure the cadence sensor has been correctly installed. For more information on installing the cadence sensor refer to the user manual of the cadence sensor.
1. Go to
General Settings
>
Pairing
>
Pair new device
. The V650 should be less than three meters from the sensor you want to pair. It's close enough when it's mounted on the handlebar.
2. Activate the sensor you want to pair. Rotate the crank a few times to activate the sensor. The flashing red light in the sensor indicates that you've activated the sensor.
Do the pairing within 30 seconds of the sensor activation.
3. V650 lists the devices it finds. The device closest to V650 is at the top of the list. Tap the device you want to pair.
4.
Pairing succeeded
tells you that the pairing is complete.
5. Link the sensor to
Bike 1
,
Bike 2
,
Bike 3
or
Bike 4
. You can change the bike later in
Paired devices
.
When you select a bike for a ride, your V650 automatically starts searching for the sensors you've linked to the bike. V650 is ready once the green circle around the sensor indicator is static.
POLAR LOOK KÉO POWER SENSOR BLUETOOTH® SMART
Truly develop your cycling performance and technique. Perfect for ambitious cyclists, this system uses
Bluetooth® Smart technology and consumes only a little energy.
l
Gives instant feedback by measuring accurate power output in watts l
Displays your left and right balance as well as the current and average cadence l
Shows how you use force against the pedal with the force vector feature l
Easy to set up and switch between bikes
PAIR KÉO POWER WITH V650
Before pairing Kéo Power make sure you have installed it correctly. For information on mounting the pedals and installing the transmitters see the Polar LOOK Kéo Power user manual that came in the product box, or
29
the video tutorial.
The transmitters need to be paired one at a time. This means that you have to perform the pairing twice when taking Kéo Power into use. After pairing the first transmitter, you can immediately pair the second one by selecting it from the list. Check the device ID on the backside of each transmitter to make sure you find the correct transmitters from the list.
1. Go to
General Settings
>
Pairing
>
Pair new device
. The V650 should be less than three meters from the sensor you want to pair it with. It's close enough when it's mounted on the handlebar.
2. Rotate the cranks to wake up the transmitters. A blinking magenta light in the sensor indicates that you've activated the sensor.
Do the pairing within 30 seconds of the sensor activation.
3. V650 lists the devices it finds. The device closest to V650 is at the top of the list. Tap the device you want to pair.
4.
Pairing succeeded
tells you that the pairing is complete.
5. Link the sensor to
Bike 1
,
Bike 2
,
Bike 3
or
Bike 4
. You can change the bike later in
Paired devices
.
6. Set the crank length in millimeters. Confirm and return to the
PAIRING
menu by tapping
When you select a bike for a ride, your V650 automatically starts searching for the sensors you've linked to the bike. V650 is ready once the green circle around the sensor indicator is static.
POWER SETTINGS ON V650
Adjust the power settings to best suit your training needs. Edit the power settings in
Settings > Sport profiles
, and choose the profile you want to edit, and choose
Power settings
.
In the
Power settings
you'll find: l
Power view
: Choose
W
(Watts),
W/kg
(Watts/kg) or
FTP %
(% of FTP).
l
FTP (W)
: Set your FTP value. The range is 60 to 600 watts.
30
l
Power, rolling average
: Set the recording frequency of power. Choose 3, 10, 30 seconds, or set other.
l
Power zones
: View and change the power zone limits.
CALIBRATE KÉO POWER
Calibrate Kéo Power before starting your session. V650 starts the calibration automatically each time the transmitters wake up and V650 is found. The calibration takes a couple of seconds.
The temperature of your training environment affects calibration accuracy. If you're going to train outdoors, for example, take your bike outdoors half an hour before doing the offset calibration. (This way your bike's temperature is about the same as that of your training environment.)
To calibrate Kéo power:
1. Choose the bike to which the sensor is linked and return to the main view by tapping
. Keep V650 in the main view during the calibration.
2. Wake up the transmitters by rotating the cranks to start the calibration.
3. Keep the bike upright and cranks in place until calibration is completed.
To ensure the calibration is done properly: l
Do not put any weight on the pedals during calibration.
l
Do not interrupt the calibration.
When the calibration is complete a green LED will blink on the transmitters, and you can start your session.
31