C-NaviGator I User Guide

Add to my manuals
85 Pages


C-NaviGator I User Guide | Manualzz

C-NaviGator User Manual


1) Apply power to the C-NaviGator by connecting the power supply to the

back of the C-NaviGator unit.

2) In a few seconds, the system menu will appear allowing the option to update the internal program, calibrate the touch-screen, or begin normal operation (default). If no action from the operator is detected, C-

NaviGator will automatically launch the program. This will take several seconds.

3) C-NaviGator automatically recalls the last settings saved and displays the

“Position Info” screen (page 22). System operating modes and status

indicators are seen on the left under GNSS Quality Alerts

(page 28). To the right are the active ports switch, the active port

indicator, and the general “Alarm” Indicators. The Switch Active button provides a means to quickly switch between different input sources for monitoring. The actual port programming and activation are accessed

from the Menu / Settings / Ports screen as described in Ports (page 29).

4) Press Prev Page and Next Page on the C-NaviGator display to scan through the various view screens. Alternatively, press Menu / View to select the specific view screen.

Version 5.2

Page 18 of 85



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF


Table of contents