C-NaviGator I User Guide

Add to my manuals
85 Pages

advertisement

C-NaviGator I User Guide | Manualzz

C-NaviGator User Manual

View

Pressing the Prev Page and Next Page buttons from any of these screens will

„walk‟ through the available View screens. Pressing Switch Active will change between available position devices to display.

Position Info

This is the default screen for

C-NaviGator.

“Position Info” displays horizontal position (in

Latitude/Longitude), Height

Above Ellipsoid (HAE), Speed

Over Ground (SOG), and

Course Over Ground (COG).

The height and speed units can be configured on the

General settings screen (page

27).

Satellite Info

This screen provides the operator with information about the constellation configuration and the signal strengths received from each visible satellite. Relative locations of the GNSS satellites to the GNSS receiver are plotted based on azimuth and elevation information provided by the GNSS receiver. The plot includes corrections satellite information. Additionally, the receiver‟s current elevation mask is annotated on the plot.

Each visible satellite is represented in the plot by a circle with the satellite ID number inside. All satellites used to compute the PVT solution are identified as

Version 5.2

Page 22 of 85

08/04/2011

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents