C-NaviGator I User Guide

Add to my manuals
85 Pages


C-NaviGator I User Guide | Manualzz

C-NaviGator User Manual

Configure Network Output

This screen allows the operator to configure the settings for a network connection. Specify the name, protocol, source and destination ports, and the destination host, then press

“Apply”. A device will be created for each virtual network port. The device can be configured from the

Settings/{DeviceName} menu item. See the sections on hardware devices for more information on configuration for the selected device types.

System Network Settings

This screen allows the operator to networking configuration for the unit.

Choose the configuration type

DHCP, Static, or Disabled.

Provide settings from your network administrator, and press the Apply button.

Version 5.2

Page 31 of 85



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF


Table of contents