C-NaviGator I User Guide

Add to my manuals
85 Pages


C-NaviGator I User Guide | Manualzz

C-NaviGator User Manual

Auxiliary Port Configuration

COM1 and COM2 on the C-

Nav3050 receiver can be configured here. Serial data transfer parameters (Baud

Rate and Parity) should be set to match that of the C-

NaviGator port. Settings for the 1PPS output can also be modified.

Output Control

Output data strings from the

C-Nav3050 can be chosen by the settings in this screen.

Some messages can be output on change, thus output at the navigation rate. The

Navigation Rate can be set on the "Solution Control" page.

Other strings can be set to output every „fixed‟ number of seconds. Input/output protocols for the C-Nav

Auxiliary Port and the PPS port can also be accessed,

Version 5.2

Page 39 of 85



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF


Table of contents