C-NaviGator I User Guide

Add to my manuals
85 Pages


C-NaviGator I User Guide | Manualzz

C-NaviGator User Manual

Section 6 - Maintenance


No Position Information

"Position Info" screen is blank.

1) Check cable interconnections.

2) Go to

Menu / Settings / Ports and verify that the settings correspond to the correct input connection.

3) Go to

Menu / Settings / General to verify that the correct “COM Port” is selected as the Active GNSS Port.


Active Port # is displayed on the right side on View screens.

No Serial Input/Output

The most common cause of data transfer problems is an incorrect setting in the port configuration.

1) Check that the serial port settings are correct and that they match the input/output device. Select Menu / Settings / Ports / xxxx.

2) The C-Nav20xx data transfer settings should be 19.2K / 8 / None / 1.

Version 5.2

Page 60 of 85



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF


Table of contents